Bedford, NH

Job Title:    Rivet/Utility

SUMMARY:  Be able to operate machines and/or perform simple to moderately complicated production tasks in the manufacture of any product produced

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

• Set up and run machines that include rivet, polish, and grind.  Prepare and load parts as instructed.
• Perform a variety of production tasks and assist as required.  May perform repetitive manual and automated finishing operations.
• Utilize visual inspections and measuring instruments to ensure parts are produced according to specifications and within tolerance levels.  May perform hand deburring, grinding, assembly and welding operations on fabricated products.
• Perform clean and pack activities as directed.  Verify laser markings.  Perform measurements as appropriate using micrometers and calipers to ensure parts have been produced according to specifications and within tolerance levels.
• Prepare product for shipping and prepare shipping labels according to customer specifications.

EDUCATION and/or EXPERIENCE:  High school diploma or equivalent.

MATHEMATICAL SKILLS:  Ability to add, subtracts, multiply and divides all units of measure, using whole numbers, common fractions, and decimals.  Ability to compute rate, ratio, and percent.

REASONING ABILITY:  Ability to apply common sense understanding to carry out written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.

PHYSICAL AND ENVIRONMENTAL DEMANDS:

While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle or feel; reach with hands and arms.  The employee frequently is required to walk.  The employee is occasionally required to talk or hear and smell.  The employee must occasionally lift and/or move up to 10 pounds.  Specific vision abilities required by this job include close vision, color vision, and ability to adjust focus. 

Shift:  1st shift  6-230pm

Payrate:  $13/hour    Westaff pays every Friday!!

Work location:  Manchester NH

APPLY NOW!!!!!!!

Inspector

JOB SUMMARY
An Inspector is responsible for ensuring our manufactured, coated fabric and/or film products meet quality specifications as required by our customers during and at the end of our manufacturing processes. Performs and operates job functions with safety, quality and efficiency in mind and in accordance with specific procedure and operational parameters. Must have excellent attention to detail in regards to visual aspects of the material being inspected. Responsible for the overall visual quality of the manufactured product.

Essential Functions
Demonstrates safety awareness and safe work practices
o Comply with Saint-Gobain safety rules, policies, and procedures
o Ensure personal protective safety equipment is worn and is in good repair, as required
o Ensure equipment and machinery are in correct and safe working order
o Safely operate powered and non-powered equipment and tools used in job functions

Follows process quality documents (PQD’s), work orders, inspection/process sheets, drawings, diagrams, procedures, and/or other instructional documentation
• Perform machine set-up and take down on inspection machines for all products
o Properly thread leader/material and adjust tensions
• Reads and interprets specifications including shop packets, sales orders and PQD’s
• Visually examine manufactured material or product for defects per PQD’s
• Verify specified dimensions of material required on sales orders
• Properly identify product defects/flaws to be able to take viable lead and/or tail QC samples
• Diagnose and troubleshoot to resolve process problems
o Use edge wheels on light films
o Align film or laminate when telescoped
o Use tension controls - rolls must be tight and straight to meet customer’s needs
• Reject and segregate non-conforming materials from conforming materials
• Route non-conforming materials to Inspection Lead and conforming materials to shipping and or inventory
• Locate and check for sales order shipment

Shift:  2nd shift   3-11pm    Mon - Fri 

Payrate:  $14-16/hour depending on experience

Work location:  Merrimack NH

APPLY NOW!!!!!!!!  

Packer

Job Summary: Order Processing Associate is responsible for packing and shipping materials to customers by using computerized warehouse management system software (SAP) and operating material handling equipment. Must foster a good working team environment and always looking for ways to improve and promote quality.

Roles & Responsibilities:
• Accurate Packing and Shipping of materials to customers.
• Operating material handling equipment- Sit-down forklifts, stand up forklifts, Order Picker
• Occasionally picking product to ensure order is filled and shipped per customer requirement
• Other duties as required.

Preferred Skills:
General Computer skills with some working knowledge of SAP
DC floor operations,
Some Material Handling Equipment experience.

Shift: 2nd shift 3pm-1130pm Mon-Fri OT available!!
MUST train on 1st shift Mon-Fri 7am-3pm
Payrate: $14.50/hour Westaff pays every Friday!
Work location: Londonderry NH

APPLY NOW!!!!!!

Fabrication Associate

The Fabrication Associate is responsible for layout, cutting and assembly of coated fabric material to specific specifications. Performs and operates job functions with safety, quality and efficiency in mind and in accordance with specific process sheets and operational parameters. Must have excellent attention to quality in regards to the visual and weight/thickness aspects of the material being used and/or produced. Responsible for the overall quality of the product being produced.

Essential Functions:
Demonstrates safety awareness and safe work practices
• Complies with Saint-Gobain safety rules, policies and procedures
• Ensures equipment and machinery are in correct and safe working order
• Safely operates powered and non-powered equipment and tools used in job functions
• Follow internal safety requirements for handling various powered equipment (up to 700 degrees) within work area

Follows work orders, process sheets, procedures, and /or other instructional documentation
• Read and interpret blueprints, to measure, cut, layout and assemble coated fabric material
• Fabricate miscellaneous parts using a variety of hand tools and measures conformance to drawings or layovers
• Layout and assemble various projects including pretension windows, antenna covers, and other products
• Complete visual inspections on material as it is processed
• Check materials using various calibrated and non-calibrated tools
• Meet productivity time and quality standards in area of responsibility
• Willing to accept and receive frequent direction and assistance from various levels of management

1+ year of manufacturing experience REQUIRED!
Naturalized US Citizen a MUST due to this being a government contract!

Shift: 2nd shift 3-11pm Mon-Fri
Payrate: $14-16/hour depending on experience.   Westaff pays every Friday!
Work location: Merrimack NH

APPLY NOW!!!!!!!

Fabrication Associate

The Fabrication Associate is responsible for layout, cutting and assembly of coated fabric material to specific specifications. Performs and operates job functions with safety, quality and efficiency in mind and in accordance with specific process sheets and operational parameters. Must have excellent attention to quality in regards to the visual and weight/thickness aspects of the material being used and/or produced. Responsible for the overall quality of the product being produced.

Essential Functions:
Demonstrates safety awareness and safe work practices
• Complies with Saint-Gobain safety rules, policies and procedures
• Ensures equipment and machinery are in correct and safe working order
• Safely operates powered and non-powered equipment and tools used in job functions
• Follow internal safety requirements for handling various powered equipment (up to 700 degrees) within work area

Follows work orders, process sheets, procedures, and /or other instructional documentation
• Read and interpret blueprints, to measure, cut, layout and assemble coated fabric material
• Fabricate miscellaneous parts using a variety of hand tools and measures conformance to drawings or layovers
• Layout and assemble various projects including pretension windows, antenna covers, and other products
• Complete visual inspections on material as it is processed
• Check materials using various calibrated and non-calibrated tools
• Meet productivity time and quality standards in area of responsibility
• Willing to accept and receive frequent direction and assistance from various levels of management

1+ year of manufacturing experience REQUIRED!
Naturalized US Citizen a MUST due to this being a government contract!

Shift: 2nd shift 3-11pm Mon-Fri
Payrate: $14.70/hour may be more depending on experience. Westaff pays every Friday!
Work location: Merrimack NH

APPLY NOW!!!!!!!

Tower Operator

GREAT temp to perm opportunity!!!!!

Shift: 3rd shift 11-7am

Payrate:  $14-16/hour depending on experience   Westaff pays every Friday!

Work location:  Merrimack NH

Job Summary: The Tower Operator is responsible for operating a 3 tier-vertical coating oven (Tower) to produce various sized rolls of coated fabric/ film material, while ensuring all customers’ quality needs and expectations are met and exceeded.- PLASTICS COMPANY!!!!

Job details:
• Perform Tower start-up, shut down and turnarounds
o Read and follow process sheet, work instructions and/or procedures to coat rolled fabric/film material
o Select rolls to be coated and carry/move to the pay-off, slide over shaft, inflate shaft and splice material to the leader
o Use various tools to move fabric/film material to/from Tower
o Follow internal environmental safety requirements for handling of coating formulation in work area
o Check materials and/or coating formulation using various calibrated and non-calibrated tools
o Recognize and correct processing problems 
o Determine through process decision making whether to continue running/operations or to stop the run
o Properly complete required paperwork/forms
o Input shop floor control data into computer systems (QAD/GEORGE)
o Perform periodic maintenance, as required/requested on Tower, to include cleaning ovens
o Maintain 5S housekeeping/organization within work area
o Willing to accept and receive frequent direction and assistance from various levels of management

• Complete visual inspections on material as it is processed through Tower run/operations
o Recognize defects, use proper descriptions and codes
o Manually adjust various machine components to correct defects as they arise
o Detect and report defective materials or questionable conditions to Tower Lead, Production Supervisor, and/or Process Engineer when necessary
o Properly complete required paperwork/forms
o Cut samples for Q.C.

REQUIRED:

1+ years Experience working in a manufacturing environment 
Accurately read a tape measure within 1/16 of an inch
Dependability and thoroughness, detail oriented
Basic computer skills

APPLY NOW!!!!!!

Set Up Machine Operators Needed!!!!!

Come join a dynamic company that is growing. This is a fantastic temp to perm opportunity!!!

Looking for machine operators that have done set up or would like to learn. You will be doing the set up for the hydraulic presses and mold machines that use metal plates of various sizes depending on the end product needed.
Must be willing to run a safe sand plaster to clean metal plates off in between jobs as needed. You can be trained to do this job if you have a desire to learn. We need consistent attendance and a desire to grow your skills. You will need to be able to stand for the whole shift.
Previous Machine Operator experience a PLUS! MUST be able to read work orders in English.

Could be some heavy lifting of the metal plates but carts are provided to move the plates to/from the machine area!!!!

Shift:
2nd shift 3pm-1230am Mon-Thurs 9 hour shifts Fri - 8 hour shift with every other Friday OFF. OT may be offered as well.

Payrate: Up to $13/hour depending on experience

Work location: Amherst NH

APPLY NOW!!!!!

Set Up Machine Operators Needed!!!!!

Come join a dynamic company that is growing. This is a fantastic temp to perm opportunity!!!

Looking for machine operators that have done set up or would like to learn. You will be doing the set up for the hydraulic presses and mold machines that use metal plates of various sizes depending on the end product needed.
Must be willing to run a safe sand plaster to clean metal plates off in between jobs as needed. You can be trained to do this job if you have a desire to learn. We need consistent attendance and a desire to grow your skills. You will need to be able to stand for the whole shift.
Previous Machine Operator experience a PLUS! MUST be able to read work orders in English.

Could be some heavy lifting of the metal plates but carts are provided to move the plates to/from the machine area!!!!

Shift:
1st shift 530am-3pm Mon-Thurs 9 hour shifts Fri - 8 hour shift with every other Friday OFF. OT may be offered as well.

Payrate: Up to $13/hour depending on experience

Work location: Amherst NH

APPLY NOW!!!!!

Part-Time Molders Needed!!!!!

Looking for added income? Here is your opportunity to work 27 hours per week. Come join a dynamic company that is growing.

Looking for molders(rubber) to help build this company's products. You will be running hydraulic presses that mold rubber into disks/diaphragms. You can be trained to do this job if you have a desire to learn. We need consistent attendance and a desire to grow your skills. You will need to be able to stand for the whole shift and possibly learn multiple molding stations. Molders create rubber disks that are formed with large molding machines. So previous Machine Operation experience is a PLUS! MUST be able to read work orders in English.

No heavy lifting!!!!

Shift: 3rd shift 1030pm-530am SUN 1230am-530am Mon-Thurs
MUST be able to train on 1st or 2nd shift for 2-6 weeks!!!!

Payrate: $12/hour Westaff pays every Friday!!!!

Work location: Amherst NH

APPLY NOW!!!!!

Molders Needed!!!!!

Come join a dynamic company that is growing. This is a fantastic temp to perm opportunity!!!

Looking for molders(rubber) to help build this company's products. You will be running hydraulic presses that mold rubber into disks/diaphragms. You can be trained to do this job if you have a desire to learn. We need consistent attendance and a desire to grow your skills. You will need to be able to stand for the whole shift and possibly learn multiple molding stations. Molders create rubber disks that are formed with large molding machines. So previous Machine Operation experience is a PLUS! MUST be able to read work orders in English.

No heavy lifting!!!!

Shift: 1st shift 530am-3pm Mon-Thurs 9 hour shifts Fri - 8 hour shift with every other Friday OFF. OT may be offered as well.

Payrate: Up to $12/hour depending on experience

Work location: Amherst NH

APPLY NOW!!!!!

Machine Operator

Responsible for the efficient and safe operation and quality of an assigned section of machines or department. Essential duties and responsibilities include but are not limited to:
Checks the master and daily department schedules for any changes, repairs, special instructions, or other tasks. Sets and monitors machine contrast, mixture machine blender, regulates temperatures, volume of plastics, and monitors pressure and time. Maintains all machines as per control standards, and ensures that the monitor, plug, cycle sheets and any other documentation are updated and accurate. Ensures that quality of products meet or exceed the standards. Investigates, repairs or plugs off any quality defects, cleans system of any defective parts and re-qualifies the process for accepted production. Perform color, material, board shots, and repair shots as per schedule. Checks the machines, mold, and auxiliary equipment to maintain proper running condition and submits a maintenance work ticket as needed. Controls all waste, scrap, and regrind. Keeps machines and department in a clean and safe condition. Communicates with out-going shift personnel for any problems or assignments to be completed.
Performs other duties and responsibilities as assigned.

Shift: 3rd shift Tues-Sat 1130pm-730am
Payrate: $14.50/hour Westaff pays every Friday!
Work location: Manchester NH

APPLY NOW!!

Extrusion Operator

Position Summary: Set-up and operation of extrusion machine to manufacture insulated cable products.

Essential Functions/Responsibilities: • Responsible to meet production standards by performing quality checks, in accordance with ISO procedures and following Process and Manufacturing specification sheets • Troubleshoot manufacturing process, meeting production schedules and customer deadlines • Measure extruded items for conformance to specifications • Communicate and work closely with fellow operators and supervisors to coordinate tasks, discuss production problems, and exchange information to produce quality products • Observes safety procedures and uses equipment and materials properly • Maintain cleanliness of work area and machines, including utilizing Jet Printers to print cables according to specifications • Subscribes to and practices 5S principles, procedures, and guidelines • Work a full time shift schedule with regular attendance and ability to work overtime as needed

Knowledge/Skills and Abilities: • Attention to detail is required in machine operation to minimizing scrap. • Ability to work with a variety of cable and wire products • Familiarity with frequent change-overs and handling of different compounds and wires in order to produce made to order and high quality products • Possess reading and comprehension skills to read, follow and understand written and verbal procedures and instructions in English, including manufacturing specifications • Log written data as required in legible format • Good math skills and above average mechanical aptitude necessary. • Hands-on experience using micrometers, calipers, gauges, and other measuring devices

Payrate: $17+/hour depending on experience plus a shift differential
Shift: 3rd shift 11pm-7am Sun-Thurs
Work location: Manchester NH

APPLY NOW!!!!!!!!

Material Handlers NEEDED!!

Great opportunity to grow with a fast paced logistics company in Merrimack NH.

Shift: 1st shift Mon-Fri 8-430pm
Payrate: $13.50/hour
Location: Merrimack NH

What you will do in a typical day-

Material handling may include picking, packing, scanning, kitting or counting product.
Adhere to the 7S program and maintain a clean work environment at all times.
Use a barcode scanner and warehouse management system.
Work in a safe manner that protects you and your coworkers.

You will need -
High School Diploma or equivalent.
Experience operating material handling equipment(pallet jack)
Ability to tolerate hot or cold warehouse environments.
Lift up to 50 lbs.
Sit or stand for long periods of time.

It would be great if you also have -
A positive attitude and the ability to work in a team to achieve goals and objectives.
One year experience in a warehouse environment preferred!
Experience using a scan gun.

APPLY NOW!

JOB SUMMARY:

Requires basic machining knowledge in order to produce machined parts to specification in an efficient and timely manner. This job requires skills to achieve metrics set forth within a specified work group or team.

ESSENTIAL DUTIES & RESPONIBILITIES:

Machine parts to specifications using documentation presented on routing/drawings and program hardcopy.
Employ use of inspection methods to ensure the quality of production.
Perform routine maintenance as described per daily machine checklist and adhere to preventive maintenance (PM) schedule to maintain optimum performance of machine.
Ability to perform entry-level problem solving skills.
Assumes responsibility for integrity of part by asking for assistance from Machinist 2 or Machinist 3
Ability to run one to two machine types.

KNOWLEDGE, SKILLS AND ABILITIES:

Ability to read and understand basic blueprints.
Ability to apply common sense understanding to carry out simple one or two step instructions. Ability to deal with standardized situations with occasional or no variables.
Ability to load and run machine.
Knowledge and ability to utilize standard measuring equipment.
Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
Basic computer skills.

EDUCATION AND WORK EXPERIENCE:

High School diploma or general education degree (GED). Six months to one year of experience.

Payrate: $16+/depending on experience

Shift: 1st shift 6-2pm

Work location: Manchester NH

APPLY NOW!!!!!!!!!!!!!!!

JOB SUMMARY:

Requires basic machining knowledge in order to produce machined parts to specification in an efficient and timely manner.  This job requires skills to achieve metrics set forth within a specified work group or team.

ESSENTIAL DUTIES & RESPONIBILITIES:

• Machine parts to specifications using documentation presented on routing/drawings and program hardcopy.
• Employ use of inspection methods to ensure the quality of production.
• Perform routine maintenance as described per daily machine checklist and adhere to preventive maintenance (PM) schedule to maintain optimum performance of machine.
• Ability to perform entry-level problem solving skills.
• Assumes responsibility for integrity of part by asking for assistance from Machinist 2 or Machinist 3
• Ability to run one to two machine types.

KNOWLEDGE, SKILLS AND ABILITIES:

• Ability to read and understand basic blueprints.
• Ability to apply common sense understanding to carry out simple one or two step instructions.  Ability to deal with standardized situations with occasional or no variables.
• Ability to load and run machine. 
• Knowledge and ability to utilize standard measuring equipment.
• Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
• Basic computer skills.

EDUCATION AND WORK EXPERIENCE:

High School diploma or general education degree (GED). Six months to one year of experience.

Payrate:  $16+/depending on experience

Shift:  2nd shift    2-10pm

Work location:  Manchester NH

APPLY NOW!!!!!!!!!!!!!!!

Armor Utility Machine Operator

Position Summary:
As an operator you will perform set-ups, changeovers and run both a stranding and colorizing machine to support fiber optic cables.

Essential Functions/ Responsibilities:
• Responsible to meet production standards.
• Ensure both process and manufacturing specification sheets are adhered to.
• Follow established quality standards by performing quality checks in accordance with ISO procedures.
• Responsible for setting up and tearing down the Stranding line and colorizer machine correctly.
• Responsible to measure insulated fiber legs, select closing dies, yarns, tapes and reel sizes.
• Responsible for selecting inks and fiber to set up the colorizer.
• Work with power switches, run controls and tension settings.
• Must complete written production paperwork neatly and legible.
• Maintain cleanliness of machines.
• Observes all safety procedures and uses equipment properly.
• Subscribes to 5S principles, procedures, and guidelines.
• Work a full time shift schedule and overtime as needed while maintaining regular attendance.

Knowledge, Skills, and Abilities:
• Reading english and understand written manufacturing specifications and process sheet instructions.
• Oral and written communication skills to keep co-workers and supervisors up-to-date.
• Good math skills and above average mechanical aptitude necessary.
• Attention to detail is required in machine operation to minimize scrap.
• Familiar with fiber materials.
• Ability to enter data into a computerized system.
• Ability to work independently with minimal direction.
• Hands on experience and knowledge using micrometers, calipers, verniers, and other measuring devices.
• Read and interpret gauges, dials and equipment controls.

Payrate: $16.75/hour Westaff pays every Friday!!!!!!!!!
Shift: 3rd shift    11pm-7am   Sun-Thurs
Work location: Manchester NH

APPLY NOW!!!!!!!!

Armor Utility Machine Operator

Position Summary:
As an operator you will perform set-ups, changeovers and run both a stranding and colorizing machine to support fiber optic cables.

Essential Functions/ Responsibilities:
• Responsible to meet production standards.
• Ensure both process and manufacturing specification sheets are adhered to.
• Follow established quality standards by performing quality checks in accordance with ISO procedures.
• Responsible for setting up and tearing down the Stranding line and colorizer machine correctly.
• Responsible to measure insulated fiber legs, select closing dies, yarns, tapes and reel sizes.
• Responsible for selecting inks and fiber to set up the colorizer.
• Work with power switches, run controls and tension settings.
• Must complete written production paperwork neatly and legible.
• Maintain cleanliness of machines.
• Observes all safety procedures and uses equipment properly.
• Subscribes to 5S principles, procedures, and guidelines.
• Work a full time shift schedule and overtime as needed while maintaining regular attendance.

Knowledge, Skills, and Abilities:
• Reading english and understand written manufacturing specifications and process sheet instructions.
• Oral and written communication skills to keep co-workers and supervisors up-to-date.
• Good math skills and above average mechanical aptitude necessary.
• Attention to detail is required in machine operation to minimize scrap.
• Familiar with fiber materials.
• Ability to enter data into a computerized system.
• Ability to work independently with minimal direction.
• Hands on experience and knowledge using micrometers, calipers, verniers, and other measuring devices.
• Read and interpret gauges, dials and equipment controls.

Qualifications:

• High School Diploma or GED
• One-year manufacturing experience and skills with machinery equipment and troubleshooting desired.
• One-three years of manufacturing experience in similar role
• Familiarity with cable and twist equipment and troubleshooting desired
• Cable and wire experience a plus
• Ability to work independently and as a team member
• Wire and cable experience a plus.
• Must have good manual dexterity and the ability to pass a color blind test.

Payrate: $16/hour Westaff pays every Friday!!!!!!!!!
Shift: 2nd shift 3pm-11pm Mon-Fri
Work location: Manchester NH

APPLY NOW!!!!!!!!

QC Inspector - 2nd shift

Position Summary:

This role is responsible to provide support to the quality control operations during shift operations to meet deliverables. This is an integral position within the Quality team interfacing with engineering personnel and other departments.

Essential Functions/Responsibilities:

• Verify product conformance to specifications
• Perform di-electric testing of cable
• Perform and assist with failure analysis
• Calibrate measuring and test equipment as required
• Partner with Engineering and Production to determine testing of job priorities
• Work with PC to ensure timely production of quality products and materials
• Maintain Quality Control documentationand records
• Address quality issues as they arise and provide prompt resolutions working with appropriate and necessary personnel
• Adhere to the core HCM goals of ISO9000 Total Quality Management and be an active participant and member of SGA Team.
• Commitment to quality/safety/efficiency
• Observe safety procedures and use equipment and materials properly
• Subscribe to and practice 5S, JIT, etc.
• Work a full time shift schedule with regular attendance, ability to work overtime as needed

 Knowledge, Skills, and Abilities:

• Attention to detail necessary
• Organizational and time management skills
• Ability to work under pressure of time and resource constraints
• Hands-on experience using micrometers, calipers, verniers, and other measuring devices
• Respond to shifting priorities in a cooperative manner
• Reading, writing, and comprehension skills in English
• Good interpersonal and communication skills to interact with co-workers and others

Qualifications:

• H.S. diploma or GED equivalent
• One-year manufacturing experience working in a quality lab environment desired
• Experience in a wire and cable manufacturing environment preferred
• Knowledge and/or related QC lab experience
• Computer literacy skills utilizing Microsoft Office, with ability to learn a customized system
• Must have visual acuity and ability to distinguish colors and pass a colorblind test to identify coded cables, products, and materials.

Shift:  2nd shift  3-11pm

Payrate:  $16/hour     Westaff pays every Friday!!!!!!

Work location:  Manchester NH

APPLY NOW!!!!!!!!!!!!!

Final Assembler

JOB SUMMARY:
Perform final assembly of cases & trays following work instructions to ensure product meets all customer expectations.

DUTIES & RESPONSIBILITIES:
• Standing at a work bench, assemble product from small and large components using small hand tools, including a screw gun
• Assembly tasks include:
o Clean product throughout the process
o Intall silicone and handles
o Set up and run pin printer machine
o Operate the dremel & dimple machines
o Perform work on the more complicated products including Biomet Microfixation
• Report labor in an accurate and timely fashion. Ensure traveler is filled out accurately.
• Stack parts on racks or appropriate table, ensuring line clearance so as to not mix product.
• Full knowledge of the final assembly shipping process.

KNOWLEDGE, SKILLS AND ABILITIES:
• Familiar with manufacturing operations
• Team player and flexible to move from one task to another
• Basic math skills
• Able to help train Assembler 1
• Able to follow written & verbal instruction.

EDUCATION AND WORK EXPERIENCE:
• High School diploma or GED. Minimum 1 year experience as an assembler Preferred.

PHYSICAL DEMANDS
While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and reach with hands and arms. The employee must occasionally lift and/or move up to 10 pounds. Specific vision abilities required by this job include near, distance, sharpness vision and color and depth perception.

Shift: 1st shift 6-230pm with LOTS of OT offered.
Payrate: $12.50+ depending on experience
Work location: Manchester NH

APPLY NOW!!!!!!!