Westaff is seeking 4th shift Plating Technicians for our client in Lincoln, NH!

Benefits of working with Westaff include:

Health, Vision, Dental

Free online courses

Weekly pay

Shift for the Plating Technician:

4th 6am-6pm

Friday-Sunday

$22.89

JOB SUMMARY for the Plating Technician:

Responsible for: Operates assigned equipment used in executing metal finishing operations by performing the following duties.

Roles & Responsibilities for the Plating Technician:

• Includes the following. Other duties may be assigned.
• Loads and unloads tote pans of parts, stacks parts in baskets, racks and/or barrels, racks, unracks, cleans, etches, desmuts, pickles, bright –dips dyes, degreases, heat treats, plates, coats, wet processes, and dries parts. Uses electric hoists and manual lifting.
• Following prescribed procedures for processing.
• Fills baskets, racks, and/or barrels with parts to be processed and lowers material into the appropriate tank.
• Removes parts when the process is completed.
• Maintains the cleanliness of tanks and work areas.
• Monitors temperature of solutions.
• Maintains daily production logs.
• Physically inspects processing to ensure quality of product.
• May be required to perform general utility work, material handling, assist with chemical handling and solution maintenance, and record keeping as needed.
• May be asked to troubleshoot simple to moderate problems.
• Is responsible for the quality of the product produced.
• Performs other duties as required.

Required Qualifications for the Plating Technician:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION and/or EXPERIENCE:

High school or general education degree (GED); or equivalent months related experience and/or training; or equivalent combination of education and experience.

LANGUAGE SKILLS:

Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information to other employees of the organization.

MATHEMATICAL SKILLS:

Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate and percent.

REASONING ABILITY:

Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations.

Other Skills and Abilities:

Must have a basic understanding of chemistry as it applies to the job, and the ability to solve problems.

Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• Stand and reach with hands and arms Regularly.
• Use hands to finger, handle or feel objects, tools, or controls Frequently.
• Walk, stoop, kneel, crouch, or crawl and talk or hear Occasionally.
• Lift and/or move up to 30 pounds Regularly.
• Close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus Required.
• The contractors are required to wear steel or composite toe safety shoes and long sleeves.

Apply now for the 4th shift Plating Technician in Lincoln, NH!

Work Schedule: Monday-Friday, 2pm-10:30pm

Pay at $20.10/Hour. Entry-Level!

Location: Seabrook NH

Job Responsibilities:

-Packing glue bottles into boxes
-working on the production line

Qualifications: 

High school diploma or GED
Able to work independently
Pay attention to details 

Working For Westaff:

Westaff is a nationwide professional staffing firm with more than 70 years of recruiting and selection expertise to match job candidates with positions where they will succeed. As the specialty franchise division of EmployBridge, the nation’s largest industrial staffing company with over 400 locations, finding your ideal job opportunity has never been easier. Through our extensive network of clients, we can introduce you to a variety of administrative, clerical or light industrial opportunities. We’re dedicated to getting good people good jobs

As a Westaff Employee We Offer You:

Competitive pay
Paid weekly (Direct Deposit or ATM Debit Card available)
Access to health benefits and retirement plan
A personal recruiter to help with job searches and assistance when at work!
FREE ONLINE skills training

Apply today for immediate consideration for our Picker/Packer job position! 

Members of the Military and Veterans Encouraged to Apply

Westaff is seeking 3rd shift Plating Technicians for our client in Lincoln, NH!

Benefits of working with Westaff include:

Health, Vision, Dental

Free online courses

Weekly pay

Shift for the Plating Technician:

 3rd 11pm-7:30am

Monday-Saturday

JOB SUMMARY for the Plating Technician:

Responsible for: Operates assigned equipment used in executing metal finishing operations by performing the following duties.

Roles & Responsibilities for the Plating Technician:

• Includes the following. Other duties may be assigned.
• Loads and unloads tote pans of parts, stacks parts in baskets, racks and/or barrels, racks, unracks, cleans, etches, desmuts, pickles, bright –dips dyes, degreases, heat treats, plates, coats, wet processes, and dries parts. Uses electric hoists and manual lifting.
• Following prescribed procedures for processing.
• Fills baskets, racks, and/or barrels with parts to be processed and lowers material into the appropriate tank.
• Removes parts when the process is completed.
• Maintains the cleanliness of tanks and work areas.
• Monitors temperature of solutions.
• Maintains daily production logs.
• Physically inspects processing to ensure quality of product.
• May be required to perform general utility work, material handling, assist with chemical handling and solution maintenance, and record keeping as needed.
• May be asked to troubleshoot simple to moderate problems.
• Is responsible for the quality of the product produced.
• Performs other duties as required.

Required Qualifications for the Plating Technician:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION and/or EXPERIENCE:

High school or general education degree (GED); or equivalent months related experience and/or training; or equivalent combination of education and experience.

LANGUAGE SKILLS:

Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information to other employees of the organization.

MATHEMATICAL SKILLS:

Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate and percent.

REASONING ABILITY:

Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations.

Other Skills and Abilities:

Must have a basic understanding of chemistry as it applies to the job, and the ability to solve problems.

Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• Stand and reach with hands and arms Regularly.
• Use hands to finger, handle or feel objects, tools, or controls Frequently.
• Walk, stoop, kneel, crouch, or crawl and talk or hear Occasionally.
• Lift and/or move up to 30 pounds Regularly.
• Close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus Required.
• The contractors are required to wear steel or composite toe safety shoes and long sleeves.

Apply now for the 3rd shift Plating Technician in Lincoln, NH!

Westaff is looking to hire an experienced Furniture Installer for a company located in Wallingford, CT!

Hours: 7am-3:30pm, must have flexibility to work weekends as needed

Pay: $20-22/hour depending on experience

The requirements/responsibilities of the Furniture Installer are:

• Must have experience in Furniture Installation
• Assemble and install various manufactures of furniture efficiently and according to manufactures recommended procedures
• Correctly operate a variety of trade tools
• Possess driver’s license and have a clean driving record
• Demonstrated ability to read blueprints and CAD installation drawings
• Available to work evenings, weekends if needed
• Ability to follow instructions in timely manner
• Must have professional teamwork/customer service attitude!!

APPLY TODAY FOR IMMEDIATE CONSIDERATION FOR THE FURNITURE INSTALLER POSITION!!

#Westaffjobs30

Westaff is seeking 2^nd shift Plating Technicians for our client in Lincoln, NH!

Benefits of working with Westaff include:

Health, Vision, Dental

Free online courses

Weekly pay

Shift for the Plating Technician:

2nd 3pm-11:30pm

Monday-Friday

$23.94

JOB SUMMARY for the Plating Technician:

Responsible for: Operates assigned equipment used in executing metal finishing operations by performing the following duties.

Roles & Responsibilities for the Plating Technician:

• Includes the following. Other duties may be assigned.
• Loads and unloads tote pans of parts, stacks parts in baskets, racks and/or barrels, racks, unracks, cleans, etches, desmuts, pickles, bright –dips dyes, degreases, heat treats, plates, coats, wet processes, and dries parts. Uses electric hoists and manual lifting.
• Following prescribed procedures for processing.
• Fills baskets, racks, and/or barrels with parts to be processed and lowers material into the appropriate tank.
• Removes parts when the process is completed.
• Maintains the cleanliness of tanks and work areas.
• Monitors temperature of solutions.
• Maintains daily production logs.
• Physically inspects processing to ensure quality of product.
• May be required to perform general utility work, material handling, assist with chemical handling and solution maintenance, and record keeping as needed.
• May be asked to troubleshoot simple to moderate problems.
• Is responsible for the quality of the product produced.
• Performs other duties as required.

Required Qualifications for the Plating Technician:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION and/or EXPERIENCE:

High school or general education degree (GED); or equivalent months related experience and/or training; or equivalent combination of education and experience.

LANGUAGE SKILLS:

Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information to other employees of the organization.

MATHEMATICAL SKILLS:

Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate and percent.

REASONING ABILITY:

Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations.

Other Skills and Abilities:

Must have a basic understanding of chemistry as it applies to the job, and the ability to solve problems.

Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• Stand and reach with hands and arms Regularly.
• Use hands to finger, handle or feel objects, tools, or controls Frequently.
• Walk, stoop, kneel, crouch, or crawl and talk or hear Occasionally.
• Lift and/or move up to 30 pounds Regularly.
• Close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus Required.
• The contractors are required to wear steel or composite toe safety shoes and long sleeves.

Apply now for the 2^nd shift Plating Technician in Lincoln, NH!

Westaff is seeking a 5th shift Machine Operator for our client in Lincoln NH!

Benefits of working with Westaff include:

Health, Vision, Dental

Free online courses

Weekly pay

Shift for the Machine Operator:

5th 6pm-6am

Friday-Sunday

$23.13/hr

Primary Purpose of the Machine Operator:

Uses machines and equipment to assist with manufacturing, while performing specialized tasks to create and produce a standard or customized product.

Major Job Responsibilities of the Machine Operator:

• Performs typical machine shop and press operations
• Operates a press production, braid winding, lathe or crimping machine in accordance with established procedures and guidelines
• Read, interpret and follow basic blueprints, diagrams, manufacturing drawings, bills of material or other written instructions or procedures.
• Accurately record number of parts produced both good and scrap
• Utilize hand tools such as a hand held screw driver and drill guns
• Maintain inventory of product in work stations Perform quality work checks to insure the product meets quality standards Identify product defects and report it
• Operate functional area equipment in a safe and efficient manner
• Maintain safety, quality, productivity and housekeeping standards as required
• Maintain accurate and timely data Report any safety problems, hazards, accidents and near misses to management
• Adjust machine settings as necessary to complete assigned task Properly use safety equipment, including machine guarding, interlocks and safety curtains are working properly or report it
• Able to troubleshoot and resolve simple quality product issues
• Meet standards and tolerances
• Other job tasks as assigned

Apply now for the 5th shift Machine Operator in Lincoln NH!

Westaff is seeking a Machine Operator for our client in Lincoln NH!

Benefits of working with Westaff include:

Health, Vision, Dental

Free online courses

Weekly pay

Shift for the Machine Operator:

2nd 3pm-11pm

Monday-Friday

$22.13/hr

Primary Purpose of the Machine Operator:

Uses machines and equipment to assist with manufacturing, while performing specialized tasks to create and produce a standard or customized product.

Major Job Responsibilities of the Machine Operator:

• Performs typical machine shop and press operations
• Operates a press production, braid winding, lathe or crimping machine in accordance with established procedures and guidelines
• Read, interpret and follow basic blueprints, diagrams, manufacturing drawings, bills of material or other written instructions or procedures.
• Accurately record number of parts produced both good and scrap
• Utilize hand tools such as a hand held screw driver and drill guns
• Maintain inventory of product in work stations Perform quality work checks to insure the product meets quality standards Identify product defects and report it
• Operate functional area equipment in a safe and efficient manner
• Maintain safety, quality, productivity and housekeeping standards as required
• Maintain accurate and timely data Report any safety problems, hazards, accidents and near misses to management
• Adjust machine settings as necessary to complete assigned task Properly use safety equipment, including machine guarding, interlocks and safety curtains are working properly or report it
• Able to troubleshoot and resolve simple quality product issues
• Meet standards and tolerances
• Other job tasks as assigned

Apply now for the 2nd shift Machine Operator in Lincoln NH!

Westaff is seeking a 3rd shift Machine Operator for our client in Lincoln NH!

Benefits of working with Westaff include:

Health, Vision, Dental

Free online courses

Weekly pay

Shift for the Machine Operator:

3rd 11pm-7:30am

Monday-Saturday

$23.13/hr

Primary Purpose of the Machine Operator:

Uses machines and equipment to assist with manufacturing, while performing specialized tasks to create and produce a standard or customized product.

Major Job Responsibilities of the Machine Operator:

•    Performs typical machine shop and press operations
•    Operates a press production, braid winding, lathe or crimping machine in accordance with established procedures and guidelines
•    Read, interpret and follow basic blueprints, diagrams, manufacturing drawings, bills of material or other written instructions or procedures.
•    Accurately record number of parts produced both good and scrap
•    Utilize hand tools such as a hand held screw driver and drill guns
•    Maintain inventory of product in work stations Perform quality work checks to insure the product meets quality standards Identify product defects and report it
•    Operate functional area equipment in a safe and efficient manner
•    Maintain safety, quality, productivity and housekeeping standards as required
•    Maintain accurate and timely data Report any safety problems, hazards, accidents and near misses to management
•    Adjust machine settings as necessary to complete assigned task Properly use safety equipment, including machine guarding, interlocks and safety curtains are working properly or report it
•    Able to troubleshoot and resolve simple quality product issues
•    Meet standards and tolerances
•    Other job tasks as assigned

Apply now for the 3rd shift Machine Operator in Lincoln NH!

Westaff is Seeking Warehouse/ Order Selecting Associates in the Middletown, CT Area for Immediate Hire!

Pay Rate: $22.82 an hour

Shift: 1:30 pm – finish, Monday- Friday, Overtime Available!

Warehouse Associate / Order Selector Responsibilities: 

• Upon receiving product, unload, crate, prepare for receiving, breakdown, and put-away product 
• Shipping Product: When shipping product, pick, crate, prepare for shipping, palletize, and load product
• Preparing products for shipment 
• Loading & unloading trucks
• Picking & packing orders per customer request 
• Inventory control and cycle counting 
• Use of RF scan gun to ensure you are selecting the correct product
• Keeping of inventory logs and shipment logs 

The ideal warehouse candidate would have prior material handling, or order selecting experience. Amazon associates strongly urged to apply! 

As a Warehouse Associate / Order Selector of Westaff the Benefits Include: 

• Weekly pay – Access to pay stubs online
• Insurance plans – Health, dental, & vision
• Retirement savings plan
• Access to FREE online skills training 

Apply today for immediate consideration! 

#westaffjobs30

Westaff is hiring for Selectors in Rocky Hill, CT!

This does include selection from perishable sections including cold conditions anywhere from 30 degrees to freezer environment

Pay Rate: Starting at $20 – $22 an hour

Shift: 8:00am-6:30pm Wednesday- Saturday OR Sunday- Wednesday.

Warehouse Selector Responsibilities:

• Properly, efficiently, and accurately select damage-free product to build pallets neatly and accurately with appropriate product according to customer specifications with labels facing out, arrows facing up
• Role is physically demanding, requiring continuous, fast-paced work that involves frequent standing, walking, bending, and lifting up to 50 lbs.
• Use a headset selection system to follow directions and accurately select damage-free products from warehouse slots
• Neatly and accurately stack cases onto pallets (up to 6 feet high) according to specific customer specifications, ensuring labels face out and arrows face up
• Verify product against pick tickets and case label and turn in complete, legible, accurate paperwork
• Check condition of pallets and exchange where necessary
• Assist in ensuring pallets are wrapped and stacked for safe transport

Warehouse Selector Requirements:

• Must work in cold storage warehouse
• Must be able to withstand the physical demands of the role, standing, lifting, and walking throughout the shift
• Experience with incentive-based selecting
• Experience operating Electric Pallet Jack and HI-LO PIT operations
• Previous experience in a warehouse or order selecting setting
• Ability to utilize material handling equipment

Apply Today to the Selector Position for Immediate Consideration!

#Westaffjobs30

Westaff is seeking a Quality Inspector for our client in Merrimack NH!

Benefits of working with Westaff include:

Health, Vision, Dental
Weekly pay

Free online courses

Schedule of the Quality Inspector:

2nd 2:55pm-10:55pm

Monday – Friday

$20-$30 DOE

Summary of the Quality Inspector:

The Quality Control Inspector 2 is responsible for inspecting the quality of in-process, final, and incoming materials. Meets all the requirements of a Level 1 with additional experience.

Responsibilities of the Quality Inspector:

•  Perform accurate dimensional and visual inspections of product
•  Collect and accurately document inspection results
•  Maintain collection of samples and document the results
•  Perform inspection of incoming, in-process, and final product
•  Evaluate product in relation to requirements
•  Can “Shadow” new employees and aid in training activities
•  Other duties as assigned

Experience of the Quality Inspector:

•  Must have experience using Calipers, Micrometers, Height Gages, Microscopes, etc.
•  Must be able to read and understand drawings
•  Must have prior Inspector experience

Qualifications of the Quality Inspector:

•  Ability to effectively use MSOffice Software
•  Ability to communicate effectively with all departments
•  Ability to determine tolerances and specifications from printed documents
•  Ability to lift 30 pounds
•  Must be detail oriented
•  Must take direction well and competently carry out instructions
•  Can run programs on Optical Comparator and CMM
•  Clean room experience a plus
•  ISO and FDA experience a plus Training

Requirements of the Quality Inspector:

•  Good documentation practices
•  Inspection equipment-CMM, Tool Makers Mic
•  IQMS-MRB, Drawings, QMS, Transactions, Scanning product to the next operation
•  Visual Rejections
•  Calibration
•  Retains

Apply to the Quality Inspector role in Merrimack NH!

Westaff is seeking a Quality Inspector for our client in Merrimack NH!

Benefits of working with Westaff include:

Health, Vision, Dental
Weekly pay

Free online courses

Schedule of the Quality Inspector:

1st 6:55am-3:15pm

Monday – Friday

$20-$30 DOE

Summary of the Quality Inspector:

The Quality Control Inspector 2 is responsible for inspecting the quality of in-process, final, and incoming materials. Meets all the requirements of a Level 1 with additional experience.

Responsibilities of the Quality Inspector:

•  Perform accurate dimensional and visual inspections of product
•  Collect and accurately document inspection results
•  Maintain collection of samples and document the results
•  Perform inspection of incoming, in-process, and final product
•  Evaluate product in relation to requirements
•  Can “Shadow” new employees and aid in training activities
•  Other duties as assigned

Experience of the Quality Inspector:

•  Must have experience using Calipers, Micrometers, Height Gages, Microscopes, etc.
•  Must be able to read and understand drawings
•  Must have prior Inspector experience

Qualifications of the Quality Inspector:

•  Ability to effectively use MSOffice Software
•  Ability to communicate effectively with all departments
•  Ability to determine tolerances and specifications from printed documents
•  Ability to lift 30 pounds
•  Must be detail oriented
•  Must take direction well and competently carry out instructions
•  Can run programs on Optical Comparator and CMM
•  Clean room experience a plus
•  ISO and FDA experience a plus Training

Requirements of the Quality Inspector:

•  Good documentation practices
•  Inspection equipment-CMM, Tool Makers Mic
•  IQMS-MRB, Drawings, QMS, Transactions, Scanning product to the next operation
•  Visual Rejections
•  Calibration
•  Retains

Apply to the Quality Inspector role in Merrimack NH!

Westaff is seeking a Machine Attendant for our client in Merrimack NH!

Benefits of working with Westaff include:

Health, Vision, Dental

Weekly pay

Free online courses

Shift for the Machine Attendant:

1st 6:55am-3:15pm

Monday thru Friday

Job Summary of the Machine Attendant:

To monitor one and/or multiple workstation(s) at the machine(s) to ensure that the packaging and inspection of the parts produced are in accordance with our safety procedures and the customer’s standards.

Job Responsibilities of the Machine Attendant include:

•  Handling of product produced from a machine
  •  This could include trimming or clipping product
  •  Packaging, weighing, and labeling product
•  Inspection of all product produced at the machine
  •  At times measuring parts with gauge pins to ensure that they are acceptable to the customer’s print
•  Maintaining a clean, neat, and organized workstation
•  Communicating any quality issues to the Shift Supervisor
•  Communicating and training the Machine Attendants on the next shift

Experience for the Machine Attendant:

Entry level position

Qualifications for the Machine Attendant:

•  Must be able to read and understand all the documentation required to perform assigned tasks (Work Order and the Operator Responsibility Sheet)
•  Basic math skills
•  Basic computer skills
•  Should be able to speak, understand and read English
•  Good communication skills
•  Positive attitude and show initiative
•  Entry level measuring

Apply now for the Machine Attendant role in Merrimack NH!

Westaff is seeking a Machine Attendant for our client in Merrimack NH!

Benefits of working with Westaff include:

Health, Vision, Dental

Weekly pay

Free online courses

Shift for the Machine Attendant:

3rd 10:55pm-7:15am

Monday thru Friday

Job Summary of the Machine Attendant:

To monitor one and/or multiple workstation(s) at the machine(s) to ensure that the packaging and inspection of the parts produced are in accordance with our safety procedures and the customer’s standards.

Job Responsibilities of the Machine Attendant include:

•  Handling of product produced from a machine
  •  This could include trimming or clipping product
  •  Packaging, weighing, and labeling product
•  Inspection of all product produced at the machine
  •  At times measuring parts with gauge pins to ensure that they are acceptable to the customer’s print
•  Maintaining a clean, neat, and organized workstation
•  Communicating any quality issues to the Shift Supervisor
•  Communicating and training the Machine Attendants on the next shift

Experience for the Machine Attendant:

Entry level position

Qualifications for the Machine Attendant:

•  Must be able to read and understand all the documentation required to perform assigned tasks (Work Order and the Operator Responsibility Sheet)
•  Basic math skills
•  Basic computer skills
•  Should be able to speak, understand and read English
•  Good communication skills
•  Positive attitude and show initiative
•  Entry level measuring

Apply now for the Machine Attendant role in Merrimack NH!

Westaff is seeking a Machine Attendant for our client in Merrimack NH!

Benefits of working with Westaff include:

Health, Vision, Dental

Weekly pay

Free online courses

Shift for the Machine Attendant:

2nd 2:55pm-11:15pm

Monday thru Friday

Job Summary of the Machine Attendant:

To monitor one and/or multiple workstation(s) at the machine(s) to ensure that the packaging and inspection of the parts produced are in accordance with our safety procedures and the customer’s standards.

Job Responsibilities of the Machine Attendant include:

•  Handling of product produced from a machine
  •  This could include trimming or clipping product
  •  Packaging, weighing, and labeling product
•  Inspection of all product produced at the machine
  •  At times measuring parts with gauge pins to ensure that they are acceptable to the customer’s print
•  Maintaining a clean, neat, and organized workstation
•  Communicating any quality issues to the Shift Supervisor
•  Communicating and training the Machine Attendants on the next shift

Experience for the Machine Attendant:

Entry level position

Qualifications for the Machine Attendant:

•  Must be able to read and understand all the documentation required to perform assigned tasks (Work Order and the Operator Responsibility Sheet)
•  Basic math skills
•  Basic computer skills
•  Should be able to speak, understand and read English
•  Good communication skills
•  Positive attitude and show initiative
•  Entry level measuring

Apply now for the Machine Attendant role in Merrimack NH!

Medical device manufacturing located in Deerfield for Manufacturing Operators !!!

Shift: 4am-2:30pm Mondays to Thursday, flex for overtime and weekend hours

Shift:2pm-12:30 min Monday to Thursdays, flex to overtime and weekend hour

Pay $20.00 per hour with a $2.00 difference between certain hours

JOB DESCRIPTION:

• Have one year or more of manufacturing/production machine operating experience
• Machine set up and operating Basic troubleshooting
• Production assembling of medical device products
• Read and understand specific written instructions (specifications)
• Able to speak and rad the English language
• Good computer skills
• GMP/FDA practices and policies 

Requirements:

• Ability to spot imperfections or flaws in an assembled device. 
• Must be able to distinguish colors and able to define defects.
• Visual acuity is necessary to do the job safely and effectively. 
• Able to work overtime and weekends when needed.
• Able to lift 45lb boxes and work in refrigerators for extended periods
• Be able to follow all PPE Requirements (gloves, safety glasses, safety shoes, and refrigerator jackets when needed)

Westaff is looking for a 1st shift Kitter from 7:00am – 3:00pm in the Clinton, MA area for Immediate hire.

Kitter
Pay:  $18.50/hour
Location:  Clinton, MA
Hours:  7:00am -3:00pm

MUST be detail oriented and willing to learn the kitting process/packaging/labeling/measuring

MUST be able to measure, read work orders in English, count

Benefits working for Westaff:

* Weekly Pay!
* Free Online Skills Building Training
* Medical, Dental, Vision

APPLY TODAY for IMMEDIATE CONSIDERATION for our Kitter job openings!

Members of the Military and Veterans Encouraged to Apply!

Westaff is looking for a 1st Shift Warehouse Supervisor-Inbound 1st shift in the Clinton, MA, area for IMMEDIATE HIRE!

Inbound Supervisor
Payrate: $22.00 p/h
Mon – Fri 7:00AM  – 3:00pm

MUST have prior Supervisor Experience
MUST have Reach Truck Experience

Benefits working for Westaff:

* Weekly Pay!
* Medical, Dental, Vision
* Free Online Skills Building Training

APPLY TODAY for IMMEDIATE CONSIDERATION for the Inbound Supervisor 1st Shift

Members of the Military and Veterans Encouraged to Apply!

Westaff is hiring an Accountant/CPA for a company located near Alexandria, LA

Pay: $85,000 – $100,000 (commensurate with experience)

Qualifications:

• 8–10 years of progressive accounting experience
• Tax accounting and/or real estate accounting experience preferred, but not required
• Advanced proficiency in Microsoft Excel
• Strong analytical and problem-solving skills with exceptional attention to detail
• Excellent written and verbal communication skills

Key Responsibilities:

• Financial Reporting & Analysis: Prepare, review, and analyze financial statements, balance sheets, and income statements in accordance with applicable accounting standards
• Budgeting & Forecasting: Perform bank reconciliations and oversee accounts payable and accounts receivable functions
• Compliance & Tax Support: Ensure compliance with current tax laws, regulatory requirements, and reporting obligations
• Property Operations: Oversee tenant billing, collaborate with property managers, and support banking and documentation requirements related to real estate acquisitions and dispositions

Additional Information:

• Prior experience with specific accounting systems is not required; training will be provided on internal platforms
• This role works closely with senior leadership, external partners, and financial institutions to ensure accurate and timely financial reporting 

Qualified candidates seeking a stable, professional environment with long-term growth potential are encouraged to apply.

#westaffjobs

Now Hiring: Accountant / CPA

Location: Near Alexandria, La 
Salary Range: $85,000 – $100,000 (commensurate with experience)

We are seeking a highly qualified and detail-oriented Accountant / CPA to join a professional accounting team. This position requires strong technical expertise, sound judgment, and the ability to manage complex financial, compliance, and reporting responsibilities while supporting organizational leadership.

Qualifications:

• 8–10 years of progressive accounting experience

• Tax accounting and/or real estate accounting experience preferred, but not required

• Advanced proficiency in Microsoft Excel

• Strong analytical and problem-solving skills with exceptional attention to detail

• Excellent written and verbal communication skills

Key Responsibilities:

• Financial Reporting & Analysis: Prepare, review, and analyze financial statements, balance sheets, and income statements in accordance with applicable accounting standards

• Budgeting & Forecasting: Perform bank reconciliations and oversee accounts payable and accounts receivable functions

• Compliance & Tax Support: Ensure compliance with current tax laws, regulatory requirements, and reporting obligations

• Property Operations: Oversee tenant billing, collaborate with property managers, and support banking and documentation requirements related to real estate acquisitions and dispositions

Additional Information:

• Prior experience with specific accounting systems is not required; training will be provided on internal platforms

• This role works closely with senior leadership, external partners, and financial institutions to ensure accurate and timely financial reporting

Qualified candidates seeking a stable, professional environment with long-term growth potential are encouraged to apply.

#westaffjobs

Westaff is hiring a Manufacturing Manager for a company near Gonzales, LA

Pay: $160K- 190K/ Annually

Hours: Monday- Friday 7am- 4pm

            Weekends & Overtime as needed

Education

• Bachelor of Science degree in Industrial Technology, Engineering, or a related field or equivalent experience preferred
• Seven or more years of experience managing the production, quality, and maintenance of pressure vessels and heat exchangers, with familiarity with relevant codes and standards (e.g., ASME, API) required

Responsibilities:

• Develop detailed project plans to monitor and control progress and ensure on-time delivery of equipment orders
• Create and analyze reports to identify performance variances and support cost and schedule alignment
• Coordinate and expedite internal and external project activities from order release through shipment
• Maintain and track project plans, schedules, and action items
• Identify scope, schedule changes, and make strategic decisions to support business objectives
• Escalate issues as needed to ensure production plans align with forecasted sales and capacity
• Lead daily production meetings to prioritize work, address constraints, and meet customer demands
• Analyze and resolve production conflicts and communicate regularly with project stakeholders
• Promote and enforce safety standards and ensure compliance with quality requirements
• Lead initiatives focused on continuous improvement of manufacturing processes

QUALIFIED CANDIDATES, APPLY TODAY!

#westaffjobs

Westaff is hiring a Crate Builder for logistics company located in Southington, CT

The Crate Builder will be responsible for utilizing power tools including saws, screw guns, and nail guns in order to correctly build shipping pallets and crates for shipments 

Payrate: $20-26/hr based on experience 

Hours: 7am-4pm or 8am-5pm 

Crate Builder Responsibilities: 

• The ability to read work instructions 
• The ability to safely operate power tools including saws, screw guns and nail guns.
• The ability to secure materials into wooden shipping.

The Ideal Crate Builder will have experience: 

• Be experienced in cutting lumber/plywood and assembling shipping crates for high value art.
• Candidates with advanced woodworking skills will also be considered.
• Must have direct experience using table saws, wall saws, and nail guns.
• Must have previous safety training experience

Westaff offers Crate Builders free online classes, weekly pay, medical, vision, dental insurance, and opportuntiy for advancement!  

#westaffjobs30

Westaff’s Career Division is now recruiting for an experienced Manufacturing Manager to lead manufacturing projects for pressure vessels and heat exchangers.  The ideal candidate will have hands-on experience with these products, a strong understanding of relevant codes and standards (e.g., ASME, API), and proven experience in project management and leading manufacturing teams. This role focuses on driving operational excellence, ensuring quality and safety, and optimizing manufacturing processes in a fast-paced industrial environment.

 Essential Duties and Responsibilities

• Develop detailed project plans to monitor and control progress and ensure on-time delivery of equipment orders
• Create and analyze reports to identify performance variances and support cost and schedule alignment
• Coordinate and expedite internal and external project activities from order release through shipment
• Maintain and track project plans, schedules, and action items
• Identify scope, schedule changes, and make strategic decisions to support business objectives
• Escalate issues as needed to ensure production plans align with forecasted sales and capacity
• Lead daily production meetings to prioritize work, address constraints, and meet customer demands
• Analyze and resolve production conflicts and communicate regularly with project stakeholders
• Promote and enforce safety standards and ensure compliance with quality requirements
• Lead initiatives focused on continuous improvement of manufacturing processes

 Required Skills

• Strong leadership and safety awareness in a manufacturing environment.
• Ability to lead, coach, develop, and motivate a production team
• Ability to delegate tasks effectively and hold team accountable
• Ability to monitor production schedules and meet output targets
• Strong customer service and relationship-building skills
• Excellent organizational, verbal, and written communication skills
• Proven ability to read and interpret engineering and fabrication drawings
• Strong analytical, problem-solving, and decision-making abilities
• Creative and innovative, demonstrating flexibility and adaptability in work style to effectively respond to multiple requests/tasks and handle sudden changes in shifting priorities 

Education

• Bachelor of Science degree in Industrial Technology, Engineering, or a related field or equivalent experience preferred

Experience

• Seven or more years of experience managing the production, quality, and maintenance of pressure vessels and heat exchangers, with familiarity with relevant codes and standards (e.g., ASME, API) required

 Physical Requirements:

• Ability to work in a physically demanding environment (walking, standing, lifting, bending, etc. for extended periods in a shop environment)
• Ability to lift to 50 pounds.
• Hands-on experience with hand and power tools used in fabrication, such as grinders, measuring instruments, etc.

 Work Environment:

• Ability to work in a fabrication shop that may be hot, noisy, dusty, dirty, or cold.
• Potential exposure to chemicals and pinching hazards.
• Personal Protective Equipment (PPE) must be worn as required.

Client is interview now! Apply with a current resume. 

• Must be able to distinguish and correctly identify industrial fabrication materials, parts, products • Assist with receiving, unpacking, organizing, storing, and distributing incoming materials.

• Accurately maintain inventory counts; reconcile inventory records with actual stock

• Match materials to heat numbers and MTRs (Material Test Reports)

• Check/verify materials dimensions

• Safely move materials to and from warehouse areas as directed.

• Maintain a clean, organized and hazard-free warehouse space.

• Operate basic warehouse equipment such as pallet jacks, forklifts, etc. while following all safety procedures.

• Complies with all applicable rules, regulations, policies, and procedures of the company.

• Perform other general warehouse tasks as assigned by supervision.

Qualifications and Skills:

• High school diploma or equivalent required.

• Experience in a warehouse or industrial environment preferred.

• Possesses strong leadership skills, effective communication, and teamwork skills.

• Ability to lift and carry 50 lbs., walk extensively, and stand for extended periods.

• Responds to questions and concerns appropriately & timely, with consistent follow up.

• Manages time efficiently and prioritizes tasks.

• Ability to be flexible and adaptable to changing situations and workloads.

• Basic proficiency in Excel, Word, Outlook and data entry.

• Willingness to learn and follow verbal and written instructions.

• Reliable and punctual work ethic.

• Strong attention to detail is a must.

• Forklift certification is a plus.

Working Conditions: Heat, noisy, dusty, dirty, cold, chemical exposures, pinching hazards, stand for periods of time, able to bend, push/pull, twist, squat, crawl, lift & climb, requires 50 lb

Apply for the Receiving/ Inventory Clerk today! 

Westaff is hiring a 2nd Shift Reach Truck/Stand up Forklift Driver in the Clinton, MA area for Immediate Start!

Experience Required

Pay: $18.50/hour
Location:  Clinton, MA
Hours: 2:00PM to 10:00PM Monday-Friday

Reach Truck Driver Job Responsibilities:

 General warehouse duties such as unloading trucks/stocking shelves/palletizing product, operating a Reach Truck

Benefits working for Westaff:

*  Weekly Pay!
*  Free Online Skills Building Training
*  Medical, Dental, Vision

APPLY TODAY for IMMEDIATE CONSIDERATION for our Forklift Driver job opening!

Members of the Military and Veterans Encouraged to Apply!

Westaff is seeking an EXPERIENCED Executive Secretary for a reputable company located off of Kaliste Saloom in Lafayette, La.

**This is a temporary position lasting 680 hours

Pay: $12.33/ Hour

Hours: 8:00am- 5:00pm

            Monday- Friday

Responsibilities:

• Review correspondence and receive telephone calls related to most sensitive and confidential matters and determines appropriate actions to be taken.
• Complete intake and referral process with all referrals who desire services
• Greet visitors
• Receive, sort and distribute mail
• Perform routine filing of documents and maintains filing system
• Operates various office equipment such as, (Fax/Copy Machine Multi phone system and typewriter)
• Contact consumers and schedules appointment for counselors
• Enter consumer data and completes referral information page in AWARE
• Determine if referral has a need for interpreter services, translator or other reasonable accommodations.
• Complete on-boarding process with new office staff

Applicants proficient in Microsoft Programs & Office Machines, APPLY TODAY!

#westaffjobs

Office Admin

The pay would be depending on experience with increases and commission is possible. 

• Strong knowledge of Microsoft Office required

• Answering multi line phone

• Administration skills.

• Patience and the ability to remain calm in stressful situations.

• The ability to organize your time and workload.

• To be thorough and pay attention to detail.

• Ability to work well with others.

• The ability to think clearly using logic and reasoning.

APPLY NOW FOR IMMEDIATE CONSIDERATION

Now Hiring: Packaging Operators – Hutchinson, MN

Day Shift | 6AM–6PM | Mon–Thur $18/hr | Growth Opportunity

Looking to build your career in a fast-paced environment? We have immediate openings for motivated Packaging Operators ready to join a team that values hard work, accuracy, and growth potential.

What You’ll Do:

• Load products into machines for packaging
• Check products for quality and accuracy
• Ensure machines are properly loaded and running smoothly
• Operate equipment to package finished products
• Follow all quality and safety standards
• Support team with additional duties as needed