Westaff is seeking a Medical Equipment Driver & Customer Service Representative for a local healthcare company in Helena, MT!

Schedule: M-F, Once a month on-call delivery!

Term: Permanent for the right fit

Pay: $15-$18/hr DOE

Duties: 

• Adheres to company policies and procedures in regards to using personnel protective safety equipment
• Assists with updating respiratory grid
• Available for on-call assignments as needed
• Completes all necessary delivery forms and paperwork including, but not limited to invoices, work orders, manifests and logs, patient care instructions, route sheets, etc.
• Coordinates verification of Medicare, Medicaid, and private insurance coverage information
• Delivers, sets up and maintains equipment at the delivery address using company vehicle
• Develops and maintains working knowledge of current products and services offered by the company and all applicable governmental regulations
• Educates the patient and/or caregiver on the safe use and maintenance of the delivered items
• Maintains assigned company vehicle in a clean and safe working condition
• Maintains referral log
• Manages all aspects of intake: answering the phone and receiving faxes, collecting patient and referral source information, data input into IMBS, printing tickets, assembling charts and processing paperwork
• Monitors office supplies
• Observes additional needs that the patient may have and reports same during morning meeting
• Prepares CMNs/SOPs for Sales Reps and documents on tracking log
• Prepares complete and accurate files for Billing Department
• Prepares tickets for daily routes
• Provides service for walk-in patients
• Reports equipment hazards and/or product incidents as required
• Works with location personnel to coordinate deliveries
• Performs other duties as assigned

Travel: Travel via company vehicle required to patient’s homes for set-ups and reoccurring delivery

Qualifications:

• Background investigation (company-wide)
• Drug screen (when applicable for the position)
• Valid driver’s license in state of residence with a clean driving record (when applicable for the position)
• Experience with medical equipment, preferred
• One year of related work experience, preferred
• Medical terminology, preferred

Education: High school diploma or GED equivalent, required

Don’t miss out- apply TODAY for our Medical Equipment Driver & Customer Service Representative position in Helena!

Veterans & Military encouraged to apply

Westaff is Looking for Assemblers for a Company in Berlin, CT!

Shifts:

6:00AM to 2:30PM, M-F

7:00AM to 3:30PM, M-F

Pay Rate: $17/hr

Assembler General Duties & Responsibilities

• Operate automatic key cutting, cylinder shell loading and plug loading machines and equipment as required.
• Assemble shells and plugs, pack and label all types of cylinders
• Make necessary adjustments to machinery 
• Follow key list/interpret complex orders to determine selection of proper assembly sequence
• Deburr pin holes and file pins flat
• Plan layout of parts or assemblies from production schedule 
• Count, wrap, pack and label assemblies and parts as required
• Transport material to and from various departments
• Fill out move or shortage tickets/ perform all related clerical work
• Use data entry equipment and/or barcode scanner 

Assembler General Skills & Abilities

• Must be able to read, organize and coordinate complex inter-related folios on orders to determine various levels of keying required 
• Conform to plant safety rules and regulations
• Use a variety of hand tools such as pliers, mallets, and drill presses for padlocks
• Requires a high school or trade school diploma or equivalent manufacturing work experience

Apply Today for Immediate Consideration! 

#westaffjobs15

WESTAFF IS CURRENTLY RECRUITING FOR DISHWASHERS IN A HOSPITAL ENVIRNOMENT IN THE CHAPEL HILL, NC AREA.

Hourly rate of pay: $14.00.

Hours: 12:30pm-9pm

Every other weekend work is required.

Dishwasher Duties:

• Taking garbage and trash out.
• Washing work areas, refrigerators, cooking equipment, walls, and floors
• Assembling, maintaining, and breaking down the dish machine
• Washing and loading large pots

Requirements: High school diploma or GED/ Immunizations required prior to starting.

 Professional Experience Requirements:

• One (1) year of experience in the food industry/Utility Industry a plus

Benefits:

• Weekly Pay
• Medical, Vision, Dental & Retirement Saving Plans
• Permanent Opportunity
• Free online Skill Building Training

APPLY today for the immediate consideration.

Members of Military and Veterans encouraged to apply!

PLEASE INCLUDE UPDATE RESUME FOR CONSIDERATION

Westaff has immediate opening for a Driver/Appliance Installation Specialist in the Durham, NC area.

$19.00 per hour

 Hours: 7:30am-3:30pm Monday-Friday

Appliance Installation Specialist Duties include:

• Deliver and install major appliances (Dish Washers) to residential and commercial sites.
• Experience performing in-home delivery.
• Experience using Moving Straps/2 person lifting straps to move appliances.
• Customer service
• Knowledge of plumbing and electrical, related to installing appliances.
• Good mechanical skills
• Ability to move appliances with appliance dollies for assistances.
• Must have good driving record and current drivers’ licenses.
• Able to drive and have experience in driving a delivery box truck

Benefits:

          Quarterly Bonus

• Medical, Vision, Dental & Retirement Saving Plans
• Free online Skill Building Training
• Paid Holidays.
• Paid Weekly.

Requirements:

• 2-5 years in related field-Installing Appliances-Electrical & Plumbing a plus.
• High School or equivalent required.
• Plumbing/Electrical Certificates a plus.
• Box Truck-experience driver.
• Clean driving record.

Apply today for immediate consideration for the Appliance Installation Specialist.

Members of the Military and Veterans encouraged to apply!!

PLEASE INCLUDE AN UPDATED RESUME FOR CONSIDERATION.

Westaff is looking for Order Picker and Packers in Bedford NH!

Benefits to Westaff Associates:

• Medical
• Dental
• Vision
• Retirement Savings Plan
• FREE Online Classes
• Weekly Pay

Schedule: 7:00am- 4:00pm Monday – Friday

Payrate: $18/hr

Skill requirements include:

• Ability to perform physical order picking
• Packing
• Stocking
• Kitting 
• Basic data entry
• Counting
• Weighing
• Safe work practices

Must be accurate and detail oriented . Reading orders and check lists as well as documentation. Able to work in an organized and structured department

Other Skill Requirements:

• Lifting up to 50 lbs.
• Use of Pallet jack. No Forklift

No Background or Drug Screen Requirements

Don’t delay apply today!

Westaff has an immediate opening for an Accounts Payable/Receivable Coordinator with a heavy focus on Accounts Payable. 

This is a temp to hire opportunity with a fantastic local company in South Baton Rouge. 

Pay range: $20-23 an hour, full benefits once converted to the client. 

Overview:

Processing invoices, payments, and reconciling accounts

Job Description:
Accounts Receivable
o Generating invoices and account statements
o Maintaining accounts receivable files and records
o Posts customer payments by recording cash, checks, and credit card transactions.
o Creating new Customers in system
o Processing all Customer Credit applications

Accounts Payable
o Match purchase orders to invoices and enter invoices into system
o Verify vendor accounts by reconciling monthly statements.
o Creating new Vendor profiles in system

Other duties as needed and assigned. Apply for the Accounts Payable Coordinator today! 

#westaffjobs 

Now Hiring!

Experienced CNC Set Up Operators

3rd. Shift: 10:30p-6:30am, Monday through Friday, available to work weekends and Overtime

Pay: Between $19-$25 Hour (depends on experience)

Great Opportunity in Manufacturing!!

Ready to learn new skills at a top manufacturing facility?  We are hiring! Now looking for a hardworking individual with a can-do attitude to join our team as a CNC Operator. Don’t miss this opportunity for training and advancement with a company that offers competitive pay and free online skills training.

Work for Westaff, a company employees rated “Best in Staffing” 9 years in a row. Apply right now! 

“The people at Westaff are very trustworthy and have a concern for their employees.” Westaff Associate, Lillie

As a Westaff Associate, We Offer You:

• Competitive pay
• Paid weekly (Direct Deposit or ATM Debit Card available)
• Access to health benefits and retirement plan
• A personal recruiter to help with job searches and assistance when at work!
• FREE ONLINE skills training

Job Responsibilities

• Reads Programs, Identify Errors, Sets Up Machines, Performs Offsets on turning machine centers
• Selects appropriate work holding and secures the workpiece in the CNC
• Loads and secures cutting tools
• Set up and operation of machine and observes cutting operation
• Compares completed workpiece with blueprint with regards to specific metric measurements based on pre-determined inspection cycle for the product
• Alerts lead of any non-compliant completed workpiece prior to continuing production
• Accurately completes required quality and production control documents
• Setting new tooling and offsetting tool/program as required
• Repeats the operation of the machine to complete the job order
• Notifies lead of any unusual occurrences with the machine, tooling or workpiece
• Performs Basic Machine Maintenance Functions
• Follows all safety procedures regarding the proper operation of the machine
• Sets up and operates CMM with existing programs
• Performs other duties as may be required or assigned

IMMEDIATE OPENING
TIG Welder Setup Operator – Seasonal Position
2nd Shift (3:30PM-2:00AM, M-F)

Kickstart Your Career as TIG Welder!

Our client leads the industry in providing superior metal forming solutions globally. With a commitment to excellence, safety, and sustainability, we empower our employees to drive innovation and quality in everything we do.

Work for a company rated “best in class” by its skilled workers 9 years in a row. Apply today!

Are you a skilled TIG Welder looking for an exciting contract opportunity? Join our team as a TIG Welder Setup Operator, specializing in TIG welding on small gauge stainless steel tubes. This contract position offers the chance to work on challenging projects with travel costs covered.

We Require Our Customers to Offer:

• Safe and clean work environment
• Employee focused workplace
• Safety programs and training

As a Westaff Assembler We Offer You:

• Competitive pay
• Paid weekly (Direct Deposit or ATM Debit Card available)
• Access to health benefits and retirement plan
• A personal recruiter to help with job searches and assistance when at work!
• FREE ONLINE skills training

 Job Requirements

• Proficiency in TIG welding on small gauge stainless steel tubes.
• Ability to set up and adjust welding equipment for precise applications.
• Experience in reading blueprints and interpreting welding specifications.
• Strong attention to detail and commitment to producing high-quality work.
• Physical ability to stand for extended periods and lift materials as needed.
• Availability for travel with travel costs covered.

Job Responsibilities

• Specialize in TIG welding techniques on small gauge stainless steel tubes.
• Set up welding equipment for precise TIG welding applications.
• Conduct quality inspections to ensure weld integrity and accuracy.
• Collaborate with team members to optimize production processes.
• Maintain records of production output and quality control measures.

Working For Westaff

Westaff is a nationwide professional staffing firm with more than 70 years of recruiting and selection expertise to match job candidates with positions where they will succeed. As the specialty franchise division of EmployBridge, the nation’s largest industrial staffing company with over 400 locations, finding your ideal job opportunity has never been easier. Through our extensive network of clients, we can introduce you to a variety of administrative, clerical or light industrial opportunities. We’re dedicated to getting good people good jobs.

#Westaffjobs

Westaff is hiring for a Facility Cleaner / Warehouse Associate in Manchester, CT!

Temp Dates: 4/25/2024 – 5/28/2024

Shift: Monday – Friday, 7:30am – 4:00pm

Pay: $16.50 an hour 

Cleaner responsibilities:

• Maintain a clean and safe work environment 
• Clean product throughout facility, such as furniture
• Use cleaning materials and equipment 
• Loadouts, unloading material off delivery trucks 
• Assemble furniture when needed 
• Clean and organize all incoming furniture
• Help to load and unload trucks or trailers 
• Vacuum areas in the building and clean other areas. Bathrooms, breakrooms, etc. 
• Trash roundup at 3:00

Cleaner requirements:

• Previous cleaning and/ or maintenance experience 
• Previous warehouse experience 
• Is okay lifting up to 50LBS 
• Can work on their feet majority of the shift 

Apply today for immediate consideration! 

#westaffjobs15

                              Westaff is now hiring for the 2024 event season.

Looking for General Audio Video Techs, Lighting Techs, Audio Techs, Meeting Room Techs, Speaker Ready Techs, Stage Hands and Ground Riggers 

 $$   Pay based upon experience $$

Shifts and locations vary based on client need and schedule

Ground Rigger

• Load and unload trucks.
• Read and comprehend floor plans and engineered drawings.
• Perform truss layout and assembly.
• Position and set chain motors.
• Mount lighting elements and other Audio/Video equipment on truss systems.
• Run cabling to power motors and elements.
• Assemble graphics and signage.
• Provide ground support to up riggers.
• Use hand tools including, but not limited to, wrenches and socket sets.

Lighting Techs:

• Load and unload trucks.
• Set and strike truss and lighting systems.
• Identify lighting element types.
• Mount lighting elements to truss systems.
• Use of various rigging knots.
• Assemble light trees.
• Identify cables and run power.

Audio Tech:

• Load and unload trucks.
• Set and strike audio equipment.
• Identify miscellaneous mic cables.
• Run mic cables to multi-channel boards.
• Operate audio boards.
• Work with presenters for proper mic positioning and sound quality.

Video Tech:

• Load and unload trucks.
• Set up and focus projectors.
• Set up fast fold screens.
• Operate cameras.
• Run video cabling.
• Video switch and recording.
• Virtual conferencing.

Meeting Room Techs:

• Load and unload trucks.
• Set up projectors, fast fold screens, audio equipment and computers for conferences.
• Provide support to presenters.
• Troubleshoot when necessary.
• Open presentation files for presenters.

Speaker Ready Techs: 

• Load and unload trucks.
• Assist presenters with the uploading of presentation into server network.
• Assist presenters with modifications to presentations.
• Customer services and ability to interact with high-profile presenters in a professional manner.
• Set up computers, monitors, and temporary network.

Westaff is Looking for Painters Located in Farmington CT!

Schedule: Monday – Friday

Hours: 11:00pm – 7:00am (will need to be OK training on 1st shift for about a month)

Salary: $17.85 per hour

Requirements for Painter:

• Follow oral and written instructions while using close vision to read CAD drawings and or manufacturing order for operating parameters.

• Prepare manufactured part for coating by masking and prepping work surface.

• Lift or move up to 50 pounds loading and unloading manufactured parts to and from the paint conveyor.

• Select powder coatings to produce desired color. Turn sprayer valves and nozzle to regulate width and pressure of spray. Pull trigger to apply prime or finish coat to work surface.

Duties for Painter: 

• Demonstrate accuracy, thoroughness, and monitor own work to ensure quality by inspecting operation output for process quality and consistency. Maintain quality standards as determined by customer specifications.

• Maintain a clean work area. Clean spray equipment and brushes with solvent.

• Incur occasional exposure to fumes or airborne particles, heat and moving mechanical parts.

• Balance team and individual responsibilities, establish and maintain positive working relationships, contribute to building a positive team spirit and support everyone’s efforts to succeed.

Benefits:

• Weekly Pay!

• Permanent Opportunity

• Free Online Skill Building Training

• Medical, Dental, Vision & Retirement Savings Plan.

APPLY NOW For Immediate Consideration!

Military and Veterans Encourage to Apply!

#Westaffjobs30

Westaff is looking for an Inbound Stocker to join a Great company in Bedford, MA!

Pay: $20.50/Hour
Position is Temp-to-Hire!
Work Location: Bedford, Mass
Shift: Monday-Friday, 5:00am-1:30pm or until all stock for the day has been put away on shelves

Job Description/Duties/Qualifications:
* Experience on a Hi-Rise (up to 30 feet) Order Picker is highly preferred, however will train the right candidate who is willing to learn
* Stocking shelves with medical products for hospitals and clinics in the Boston area
* Able to read work orders in English
* Able to lift up to 40 lbs.

Benefits of working with Westaff:
* Weekly pay on Fridays!
* Medical, Dental & Vision
* FREE online skills building training

Members of the Military and Veterans Encouraged to Apply!

APPLY NOW for IMMEDIATE CONSIDERATION for our Inbound Stocker opening!

Westaff is searching for a Order Picker/Packer for our client in Bedford, NH

Benefits to our Westaff Associates:

• Medical
• Dental
• Vision
• Retirement Savings Plan
• FREE online training
• WEEKLY Pay

Schedule:

Monday – Friday

7am – 4pm

$18

Responsibilities of the Order Picker/Packer:

• Skill requirements include ability to perform physical order picking , packing, stocking and kitting skills as well as other opportunities within areas
• Knowledge of basic data entry, counting, weighing and safe work practices, such as no cell phone use while in work area is required.
• Must be accurate and detail oriented .
• Reading orders and check lists as well as documentation.
• Able to work in an organized and structured department . 
• Lifting up to 50 lbs.
• Use of Pallet jack. No Forklift

Apply NOW for immediate consideration!

Westaff is hiring for a Maintenance Technician in Enfield, CT!

Hours: 3:00pm – 11:30pm

2nd Shift: Monday – Friday

Salary: $18 – $26 an hour, Depending On Experience! 

Maintenance Technician Job Description:

A reliable, skilled electro-mechanical technician to preform essential upkeep tasks throughout the facility. You will be responsible for a wide variety of activates such as repairs, maintenance, and upgrades to ensure that the facility and equipment are in proper operating condition. Being reliable and self-motivated with a keen eye for detail is essential, the ideal candidate will have significant work experience, solid technical knowledge, excellent communication skills, and self motivated. Manual dexterity and physical stamina is necessary for this work. 

Maintenance Technician Job Responsibilities:

• Perform major and minor repairs, such as repairing broken or failed items or damages to the facility. 
• Install necessary replacement parts and equipment as needed. 
• Diagnose electrical  and mechanical problems and determine how to correct them, checking blueprints, repair manual, on line solutions or parts catalogs, as necessary.
• Operate a variety of hand and power tools to repaid, grease, weld, cut, change parts and complete tasks. 
• Collaborate with the team and other professionals during renovations and equipment repairs or modifications. 

Maintenance Technician Qualifications:

• Proven experience as a repair technician or other similar positions, preferably in an industrial setting. 
• Working knowledge of plumbing and electrical systems.
• Ability to weld, cut, drill etc. metals such as steel and stainless steels. 
• Experience working with tools, including hand and electrical tools. 
• Ability to reach and utilize technical manuals, online information and drawings.

Westaff Benefits:

• Weekly Pay
• Permanent Opportunity
• Free Online Skill Building Training
• Medical, Dental and vision Insurance Plan 

Apply today for Immediate Consideration.

Members of the Military and Veterans are Encouraged to apply!

#westaffjobs30

Seeking a Maintenance & Repair Technician Located in South Windsor, Ct!

Schedule: 1st shift, Monday – Friday

Hours: 7:00am-3:30pm, OT ability!

Salary: $50,000 – $52,000

Responsibilities:

• High production custom millwork facility.

• Service production woodworking equipment (molders, gang rip saws, planers, sanders, paint line, end matcher, cut-to-length, knife grinders, sawdust collection, etc).

• Create repair schedules and perform preventative maintenance, perform equipment repairs, purchase machine parts and shop supplies from vendors, work with factor technicians as required.

Now Hiring Assembly Worker
2nd Shift

Ready to work in the Fast-Growing Manufacturing Industry?

Looking to join a fast-growing company offering good pay and benefits, a safe work environment and the chance to learn new skills?  If you are an assembler, with great attention to detail, we have a great job for you! Don’t miss this chance to join our team!

Work for a company rated “best in class” by its associates 9 years in a row. Apply today!

“At Westaff, the staff is friendly and competent at finding a position quickly based on your individual skill set.” Westaff Associate, Christina

We Require Our Customers to Offer:

• Safe and clean work environment
• Employee focused workplace
• Safety programs and training

As a Westaff Assembler We Offer You:

• Competitive pay
• Paid weekly (Direct Deposit or ATM Debit Card available)
• Access to health benefits and retirement plan
• A personal recruiter to help with job searches and assistance when at work!
• FREE ONLINE skills training

 Job Requirements

• Previous Assembly experience a plus, but not required
• Attention to detail
• Able to use basic hand and power tools
• Basic math
• Lift up to 20-50 lbs. and  stand, bend, and reach

Job Responsibilities

• Follow safety guidelines
• Follow standard work instructions as assigned
• Perform hands-on tasks
• Maintain clean and organized workspace
• Meet production standards
• Work in an individual or team environment
• Inspect and assemble product
• Pack and prepare product for shipping

Working For Westaff

Westaff is a nationwide professional staffing firm with more than 70 years of recruiting and selection expertise to match job candidates with positions where they will succeed. As the specialty franchise division of EmployBridge, the nation’s largest industrial staffing company with over 400 locations, finding your ideal job opportunity has never been easier. Through our extensive network of clients, we can introduce you to a variety of administrative, clerical or light industrial opportunities. We’re dedicated to getting good people good jobs

IMMEDIATE OPENING! Plating Technicians

3rd Shift

A Company That Treats You Right!

Put your experience to work with a company that treats you right. Offering competitive weekly pay, good benefits and the opportunity to work with a great team of people!

This plating technician position is at a well-respected facility with opportunity for advancement and growth. If you can multi-task, troubleshoot, and work safe, this is the opportunity for you.

Apply today and find out why Westaff was named a ‘best in class” employer 9 years in a row.

“I love working for Westaff.” Westaff Associate, Natasha

We Require Our Customers to Offer:

• Safe and clean work environment
• Employee focused workplace
• Safety programs and training

As a Westaff Plating Technician We Offer You:

• Competitive pay
• Paid weekly (Direct Deposit or ATM Debit Card available)
• Access to health benefits and retirement plan
• A personal recruiter to help with job searches and assistance when at work!
• FREE ONLINE skills training

Job Requirements

• Attend to detail
• Basic Math
• Able to multi-task and identify problems

Job Responsibilities

• Loads and unloads tote pans of parts, stacks parts in baskets, racks and/or barrels, racks, unracks, cleans, etches, desmuts, pickles, bright –dips dyes, degreases, heat treats, plates, coats, wet processes and dries parts.
• Uses electric hoists and manual lifting.
• Following prescribed procedures for processing.
• Fills baskets, racks, and/or barrels with parts to be processed and lowers material into appropriate tank.
• Removes parts when process is completed.
• Maintains cleanliness of tanks and work areas.
• Monitors temperature of solutions.
• Maintains daily production logs.
• Physically inspects processing to ensure quality of product.
• May be required to perform general utility work, material handling, assist with chemical handling and solution maintenance and record keeping as needed.
• May be asked to troubleshoot simple to moderate problems.
• Is responsible for quality of product produced.
• Performs other duties as required.

Working For Westaff

Westaff is a nationwide professional staffing firm with more than 70 years of recruiting and selection expertise to match job candidates with positions where they will succeed. As the specialty franchise division of EmployBridge, the nation’s largest industrial staffing company with over 400 locations, finding your ideal job opportunity has never been easier. Through our extensive network of clients, we can introduce you to a variety of administrative, clerical or light industrial opportunities. We’re dedicated to getting good people good jobs

ENTRY LEVEL OPPORTUNITY: PLATING TECHNICIANS WANTED

4th Shift – 36 hours of work for a full paycheck!

NO EXPERIENCE NEEDED!

Work Hard. Get Rewarded!

Are you the right plating technician for this job? We’re hiring competent professionals to join a team where hard work and safety are valued. The pay is good. The benefits are good too, including medical and retirement plans. We also offer FREE online skills training, and personal support along the way. The ideal candidate has attention to detail, basic math skills, and the ability to multi-task and identify problems.

Apply now and learn why light industrial workers want to work for Westaff 5x more than the competition.

“I love working for Westaff.” Westaff Associate, Natasha

We Require Our Customers to Offer:

• Safe and clean work environment
• Employee focused workplace
• Safety programs and training

As a Westaff Plating Technician We Offer You:

• Competitive pay
• Paid weekly (Direct Deposit or ATM Debit Card available)
• Access to health benefits and retirement plan
• A personal recruiter to help with job searches and assistance when at work!
• FREE ONLINE skills training

Job Requirements

• Attend to detail
• Basic Math
• Able to multi-task and identify problems

Job Responsibilities

• Loads and unloads tote pans of parts, stacks parts in baskets, racks and/or barrels, racks, unracks, cleans, etches, desmuts, pickles, bright –dips dyes, degreases, heat treats, plates, coats, wet processes and dries parts.
• Uses electric hoists and manual lifting.
• Following prescribed procedures for processing.
• Fills baskets, racks, and/or barrels with parts to be processed and lowers material into appropriate tank.
• Removes parts when process is completed.
• Maintains cleanliness of tanks and work areas.
• Monitors temperature of solutions.
• Maintains daily production logs.
• Physically inspects processing to ensure quality of product.
• May be required to perform general utility work, material handling, assist with chemical handling and solution maintenance and record keeping as needed.
• May be asked to troubleshoot simple to moderate problems.
• Is responsible for quality of product produced.
• Performs other duties as required.

Working For Westaff

Westaff is a nationwide professional staffing firm with more than 70 years of recruiting and selection expertise to match job candidates with positions where they will succeed. As the specialty franchise division of EmployBridge, the nation’s largest industrial staffing company with over 400 locations, finding your ideal job opportunity has never been easier. Through our extensive network of clients, we can introduce you to a variety of administrative, clerical or light industrial opportunities. We’re dedicated to getting good people good jobs.

ATTENTION: EXPERIENCED TOOL ASSEMBLY & REPAIR PERSON WANTED 

2nd Shift 

Work Hard. Get Rewarded!

Are you the right tool assembly & repair person for this job? We’re hiring experienced, competent professionals to join a team where hard work and safety are valued. The pay is good. The benefits are good too, including medical and retirement plans. We also offer FREE online skills training, and personal support along the way. The ideal candidate has 3-5 years experience and/or training, reasonable knowledge of hydraulic devices and how they work and the ability to read and interpret hydraulic and electrical schematics.

Apply now and learn why light industrial workers want to work for Westaff 5x more than the competition.

“I love working for Westaff.” Westaff Associate, Natasha

We Require Our Customers to Offer:

• Safe and clean work environment
• Employee focused workplace
• Safety programs and training

As a Westaff Associate We Offer You:

• Competitive pay
• Paid weekly (Direct Deposit or ATM Debit Card available)
• Access to health benefits and retirement plan
• A personal recruiter to help with job searches and assistance when at work!
• FREE ONLINE skills training

Job Requirements

• 3-5 years related experience and/or training; or equivalent combination of education and experience.
• Assemble mechanical and hydraulic tools
• Ability to maintain quality standards
• Ability to read and interpret documents such as safety rules, blueprints, operating and maintenance instructions and procedure manuals.
• Reasonable understanding of hydraulic devices and functions including check balls and springs, sealing surfaces, pressure valves, flow characteristics, flow distribution, drag, effects of air on performance and conformance to specification, cavitation, high- and low- pressure circuits, seals, etc.
• Ability to read and translate hydraulic and electrical diagrams and schematics
• Ability to work successfully within a team environment, willing to contribute to team problem solving activities such as six sigma or Kaizen
• Strong mechanical aptitude and knowledge of hydraulic systems

Job Responsibilities

• Performs assembly of mechanical or hydraulic tools by utilizing work order routing, product drawing, and QCIP to guide proper assembly of components.
• Fastens components together with bolts, screws, speed clips, rivets, or other fasteners utilizing hand tools.
• Operates drill presses, lathes, grinders, arbor presses, and hydraulic presses to assist in assembly operation.
• Verifies conformance to specifications utilizing measuring devices to calibrate tools and verifying performance to Quality Control Inspection Plan (QCIP).
• Maintains all necessary records and reports including serialization of tools and components.
• Maintains clean and organized workstation at all times. Observes all quality requirements, work standards, and safe work practices.
• Fills tools with hydraulic fluid and bleeds air from system. Tests for function of hydraulic circuit by operating tool.
• Packages and prepares tools for shipment by following work order routings and drawing instructions.
• Follows all Lean work standards including but not limited to Standard Work, Production Analysis Charts, Red Bin, 5S, and Kanban replenishment.
• May be required to be trained in proper handling of hazardous waste in accordance with 40 CFR 265.16 due to the various waste generated within Burndy. If required, must take part in documented annual reviews of Hazardous Waste regulations.

Working For Westaff

Westaff is a nationwide professional staffing firm with more than 70 years of recruiting and selection expertise to match job candidates with positions where they will succeed. As the specialty franchise division of EmployBridge, the nation’s largest industrial staffing company with over 400 locations, finding your ideal job opportunity has never been easier. Through our extensive network of clients, we can introduce you to a variety of administrative, clerical or light industrial opportunities. We’re dedicated to getting good people good jobs.

ENTRY LEVEL OPPORTUNITY: PLATING TECHNICIANS WANTED

1st Shift

NO EXPERIENCE NEEDED!

Work Hard. Get Rewarded!

Are you the right plating technician for this job? We’re hiring competent professionals to join a team where hard work and safety are valued. The pay is good. The benefits are good too, including medical and retirement plans. We also offer FREE online skills training, and personal support along the way. The ideal candidate has attention to detail, basic math skills, and the ability to multi-task and identify problems.

Apply now and learn why light industrial workers want to work for Westaff 5x more than the competition.

“I love working for Westaff.” Westaff Associate, Natasha

We Require Our Customers to Offer:

• Safe and clean work environment
• Employee focused workplace
• Safety programs and training

As a Westaff Plating Technician We Offer You:

• Competitive pay
• Paid weekly (Direct Deposit or ATM Debit Card available)
• Access to health benefits and retirement plan
• A personal recruiter to help with job searches and assistance when at work!
• FREE ONLINE skills training

Job Requirements

• Attend to detail
• Basic Math
• Able to multi-task and identify problems

Job Responsibilities

• Loads and unloads tote pans of parts, stacks parts in baskets, racks and/or barrels, racks, unracks, cleans, etches, desmuts, pickles, bright –dips dyes, degreases, heat treats, plates, coats, wet processes and dries parts.
• Uses electric hoists and manual lifting.
• Following prescribed procedures for processing.
• Fills baskets, racks, and/or barrels with parts to be processed and lowers material into appropriate tank.
• Removes parts when process is completed.
• Maintains cleanliness of tanks and work areas.
• Monitors temperature of solutions.
• Maintains daily production logs.
• Physically inspects processing to ensure quality of product.
• May be required to perform general utility work, material handling, assist with chemical handling and solution maintenance and record keeping as needed.
• May be asked to troubleshoot simple to moderate problems.
• Is responsible for quality of product produced.
• Performs other duties as required.

Working For Westaff

Westaff is a nationwide professional staffing firm with more than 70 years of recruiting and selection expertise to match job candidates with positions where they will succeed. As the specialty franchise division of EmployBridge, the nation’s largest industrial staffing company with over 400 locations, finding your ideal job opportunity has never been easier. Through our extensive network of clients, we can introduce you to a variety of administrative, clerical or light industrial opportunities. We’re dedicated to getting good people good jobs.

ATTENTION: EXPERIENCED TOOL ASSEMBLY & REPAIR PERSON WANTED 

4th Shift (Fri – Mon | 6:00am-6:00pm)

Work Hard. Get Rewarded!

Are you the right tool assembly & repair person for this job? We’re hiring experienced, competent professionals to join a team where hard work and safety are valued. The pay is good. The benefits are good too, including medical and retirement plans. We also offer FREE online skills training, and personal support along the way. The ideal candidate has 3-5 years experience and/or training, reasonable knowledge of hydraulic devices and how they work and the ability to read and interpret hydraulic and electrical schematics.

Apply now and learn why light industrial workers want to work for Westaff 5x more than the competition.

“I love working for Westaff.” Westaff Associate, Natasha

We Require Our Customers to Offer:

• Safe and clean work environment
• Employee focused workplace
• Safety programs and training

As a Westaff Associate We Offer You:

• Competitive pay
• Paid weekly (Direct Deposit or ATM Debit Card available)
• Access to health benefits and retirement plan
• A personal recruiter to help with job searches and assistance when at work!
• FREE ONLINE skills training

Job Requirements

• 3-5 years related experience and/or training; or equivalent combination of education and experience.
• Assemble mechanical and hydraulic tools
• Ability to maintain quality standards
• Ability to read and interpret documents such as safety rules, blueprints, operating and maintenance instructions and procedure manuals.
• Reasonable understanding of hydraulic devices and functions including check balls and springs, sealing surfaces, pressure valves, flow characteristics, flow distribution, drag, effects of air on performance and conformance to specification, cavitation, high- and low- pressure circuits, seals, etc.
• Ability to read and translate hydraulic and electrical diagrams and schematics
• Ability to work successfully within a team environment, willing to contribute to team problem solving activities such as six sigma or Kaizen
• Strong mechanical aptitude and knowledge of hydraulic systems

Job Responsibilities

• Performs assembly of mechanical or hydraulic tools by utilizing work order routing, product drawing, and QCIP to guide proper assembly of components.
• Fastens components together with bolts, screws, speed clips, rivets, or other fasteners utilizing hand tools.
• Operates drill presses, lathes, grinders, arbor presses, and hydraulic presses to assist in assembly operation.
• Verifies conformance to specifications utilizing measuring devices to calibrate tools and verifying performance to Quality Control Inspection Plan (QCIP).
• Maintains all necessary records and reports including serialization of tools and components.
• Maintains clean and organized workstation at all times. Observes all quality requirements, work standards, and safe work practices.
• Fills tools with hydraulic fluid and bleeds air from system. Tests for function of hydraulic circuit by operating tool.
• Packages and prepares tools for shipment by following work order routings and drawing instructions.
• Follows all Lean work standards including but not limited to Standard Work, Production Analysis Charts, Red Bin, 5S, and Kanban replenishment.
• May be required to be trained in proper handling of hazardous waste in accordance with 40 CFR 265.16 due to the various waste generated within Burndy. If required, must take part in documented annual reviews of Hazardous Waste regulations.

Working For Westaff

Westaff is a nationwide professional staffing firm with more than 70 years of recruiting and selection expertise to match job candidates with positions where they will succeed. As the specialty franchise division of EmployBridge, the nation’s largest industrial staffing company with over 400 locations, finding your ideal job opportunity has never been easier. Through our extensive network of clients, we can introduce you to a variety of administrative, clerical or light industrial opportunities. We’re dedicated to getting good people good jobs.

Westaff is Looking for 2nd and 3rd Shift Quality Inspectors for a Company in Deep River, CT!

2nd shift: 3:30PM to 12:00AM, M-F

3rd shift: 11:30PM to 8:00AM, M-F

**Training Shift – both will need to train on 1st shift for 2 weeks, 7:30AM to 4:00PM

2nd shift Payrate: $20.20/hr
3rd shift Payrate: $20.70/hr

Quality Inspector Responsibilities

• Assure finished goods meet or exceed customer expectations
• Responsible for finding classification of typical defects. (Critical, Major, etc.)
• Alert the Operator to all defects to be sure they are addressed
• Verify specifications sheet that packaging parameters are being met
• Assist Operator – grinding during machine start up, clear machine jams, perform housekeeping on and around machines
• Inspect work areas
• Perform sweeping, cleaning & sorting duties as necessary

Quality Inspector Physical Requirements

• Ability to lift up to 40lbs continuously throughout the shift
• Ability to continuously lift, bend, reach, and twist 

Apply Today For Immediate Consideration!

#westaffjobs15

Westaff is Looking for a 3rd Shift Machine Operator for a Company in Deep River, CT!

Shift: 11:30PM to 8:00AM, M-F

*Training Shift: Will have to train on 1st shift for 2 weeks, 7:30am to 4:00pm. 

Pay Rate: $20.84/hr

Machine Operator Responsibilities

• Start and operate Magnetic Drilling (BDS) machines, RST machines & auxiliary equipment as needed
• Inspect product and make adjustments to machines as needed
• Adjust machines to ensure they are meeting quality and production standards
• Keep production floor clean of tails, moils, pellets, bottles, and any material i.e. regrind etc
• Any other duties as assigned by the supervisor

Machine Operator Physical Requirements 

• Ability to stand the entire shift
• Ability to lift 50lbs
• Ability to climb ladders

Machine Operator Qualifications

• Prior manufacturing experience (required)
• Prior Machine Operating experience (preferred)

Apply Today for Immediate Consideration!

#westaffjobs30

NOW HIRING! Warehouse Associate

1st Shift

Competitive Pay & Great People, Too!

If you want a job where employees are paid fairly and treated well, then check this out! We’re NOW HIRING for a warehouse associate with one of the most well-known facilities in the area. This is your chance to not only work alongside great people, but to grow your career with FREE online skills training!

Apply today and find out why manufacturing workers want to work for Westaff 5x more than our competition.

“Westaff finds good jobs that turn into careers. They truly care and find jobs that fit your needs.” Westaff Associate, Robin

As a Westaff Warehouse Associate We Offer You:

• Competitive pay
• Paid weekly (Direct Deposit or ATM Debit Card available)
• Access to health benefits and retirement plan
• A personal recruiter to help with job searches and assistance when at work!
• FREE ONLINE skills training

Job Requirements:

• Forklift experience required.
• Shipping/receiving, warehouse experience required.
• Able to carry, twist, push, pull products and lift up to 20-50 lbs.
• Able to stand, walk and bend for the entire shift.
• Experience with RF scanners and warehouse computers, a plus.
• Able to follow written and verbal work instructions.
• Basic math.

Job Responsibilities:

• Follow safety guidelines
• Meet accuracy standards with attention to detail
• Follow warehouse policies and procedures
• Consistently meet productivity standards
• Store, move, and manage materials
• Pick, pack, and palletize products for shipment
• May utilize industrial equipment to load or unload trailers/containers
• May work individually or in a team environment

Working For Westaff

Westaff is a nationwide professional staffing firm with more than 70 years of recruiting and selection expertise to match job candidates with positions where they will succeed. As the specialty franchise division of EmployBridge, the nation’s largest industrial staffing company with over 400 locations, finding your ideal job opportunity has never been easier. Through our extensive network of clients, we can introduce you to a variety of administrative, clerical or light industrial opportunities. We’re dedicated to getting good people good jobs

NOW HIRING! Warehouse Associate

2nd Shift

Competitive Pay & Great People, Too!

If you want a job where employees are paid fairly and treated well, then check this out! We’re NOW HIRING for a warehouse associate with one of the most well-known facilities in the area. This is your chance to not only work alongside great people, but to grow your career with FREE online skills training!

Apply today and find out why manufacturing workers want to work for Westaff 5x more than our competition.

“Westaff finds good jobs that turn into careers. They truly care and find jobs that fit your needs.” Westaff Associate, Robin

As a Westaff Warehouse Associate We Offer You:

• Competitive pay
• Paid weekly (Direct Deposit or ATM Debit Card available)
• Access to health benefits and retirement plan
• A personal recruiter to help with job searches and assistance when at work!
• FREE ONLINE skills training

Job Requirements:

• Forklift experience required.
• Shipping/receiving, warehouse experience required.
• Able to carry, twist, push, pull products and lift up to 20-50 lbs.
• Able to stand, walk and bend for the entire shift.
• Experience with RF scanners and warehouse computers, a plus.
• Able to follow written and verbal work instructions.
• Basic math.

Job Responsibilities:

• Follow safety guidelines
• Meet accuracy standards with attention to detail
• Follow warehouse policies and procedures
• Consistently meet productivity standards
• Store, move, and manage materials
• Pick, pack, and palletize products for shipment
• May utilize industrial equipment to load or unload trailers/containers
• May work individually or in a team environment

Working For Westaff

Westaff is a nationwide professional staffing firm with more than 70 years of recruiting and selection expertise to match job candidates with positions where they will succeed. As the specialty franchise division of EmployBridge, the nation’s largest industrial staffing company with over 400 locations, finding your ideal job opportunity has never been easier. Through our extensive network of clients, we can introduce you to a variety of administrative, clerical or light industrial opportunities. We’re dedicated to getting good people good jobs

NOW HIRING! Warehouse Associate

3rd Shift

Competitive Pay & Great People, Too!

If you want a job where employees are paid fairly and treated well, then check this out! We’re NOW HIRING for a warehouse associate with one of the most well-known facilities in the area. This is your chance to not only work alongside great people, but to grow your career with FREE online skills training!

Apply today and find out why manufacturing workers want to work for Westaff 5x more than our competition.

“Westaff finds good jobs that turn into careers. They truly care and find jobs that fit your needs.” Westaff Associate, Robin

As a Westaff Warehouse Associate We Offer You:

• Competitive pay
• Paid weekly (Direct Deposit or ATM Debit Card available)
• Access to health benefits and retirement plan
• A personal recruiter to help with job searches and assistance when at work!
• FREE ONLINE skills training

Job Requirements:

• Forklift experience required.
• Shipping/receiving, warehouse experience required.
• Able to carry, twist, push, pull products and lift up to 20-50 lbs.
• Able to stand, walk and bend for the entire shift.
• Experience with RF scanners and warehouse computers, a plus.
• Able to follow written and verbal work instructions.
• Basic math.

Job Responsibilities:

• Follow safety guidelines
• Meet accuracy standards with attention to detail
• Follow warehouse policies and procedures
• Consistently meet productivity standards
• Store, move, and manage materials
• Pick, pack, and palletize products for shipment
• May utilize industrial equipment to load or unload trailers/containers
• May work individually or in a team environment

Working For Westaff

Westaff is a nationwide professional staffing firm with more than 70 years of recruiting and selection expertise to match job candidates with positions where they will succeed. As the specialty franchise division of EmployBridge, the nation’s largest industrial staffing company with over 400 locations, finding your ideal job opportunity has never been easier. Through our extensive network of clients, we can introduce you to a variety of administrative, clerical or light industrial opportunities. We’re dedicated to getting good people good jobs

NOW HIRING! Machine Operator

3rd Shift

America is getting back to work and we need people like you! Bring your skills and strong work ethic to a company that truly values its employees. Competitive pay, great benefits and free online skills training are what you will get when you join our fast-growing team!  We have an immediate opening for a Machine Operator who can multi-task, troubleshoot, and work safe.  Sounds like you?  Then let’s talk.

Apply today and find out why Westaff was named a ‘best in class” employer 9 years in a row.

“Westaff is just a great company to work for. I really appreciated the way my representative helped and supported me.” Westaff Associate, Angela

We Require Our Customers to Offer:

• Safe and clean work environment
• Employee focused workplace
• Safety programs and training

As a Westaff Machine Operator We Offer You:

• Competitive pay
• Paid weekly (Direct Deposit or ATM Debit Card available)
• Access to health benefits and retirement plan
• A personal recruiter to help with job searches and assistance when at work!
• FREE ONLINE skills training

Job Requirements

• Attend to detail
• Basic Math
• Able to multi-task and identify problems

Job Responsibilities

• Follow safety guidelines, and additional PPE where required
• Follow standard work instructions as assigned
• Maintain a clean and organized workspace
• Troubleshoot equipment issues
• Meet production standards
• Inspection of product
• Accurate recordkeeping and quality documentation
• Machine set up and operation
• May work individually or in a team environment

Working For Westaff

Westaff is a nationwide professional staffing firm with more than 70 years of recruiting and selection expertise to match job candidates with positions where they will succeed. As the specialty franchise division of EmployBridge, the nation’s largest industrial staffing company with over 400 locations, finding your ideal job opportunity has never been easier. Through our extensive network of clients, we can introduce you to a variety of administrative, clerical or light industrial opportunities. We’re dedicated to getting good people good jobs

Westaff is looking for a Forklift Operator in Mansfield, MA for Immediate Start!

Pay Rate: $20/hr

1st Shift 8am-4:30pmLocation: Mansfield MA Job Duties: Operates a forklift. Performs all material handler functions. Meets unit quality and productivity metrics.

Completes paperwork thoroughly and promptly.

Performs housekeeping tasks to maintain a safe work environment.

Accurately and courteously load client merchandise. e

Bnefits for working with Westaff

: Weekly Pay! Free Online Skill

Building Courses Medical,

Dental, and Vision

Apply now for our Material Handler/Forklift Operator Position! Placements Required

ATTENTION: MACHINE OPERATORS WANTED

2nd Shift

NO EXPERIENCE NEEDED!

Work Hard. Get Rewarded!

Are you the right machine operator for this job? We’re hiring competent professionals to join a team where hard work and safety are valued. The pay is good. The benefits are good too, including medical and retirement plans. We also offer FREE online skills training, and personal support along the way. The ideal candidate has attention to detail, basic math skills, and the ability to multi-task and identify problems.

Apply now and learn why light industrial workers want to work for Westaff 5x more than the competition.

“I love working for Westaff.” Westaff Associate, Natasha

We Require Our Customers to Offer:

• Safe and clean work environment
• Employee focused workplace
• Safety programs and training

As a Westaff Machine Operator We Offer You:

• Competitive pay
• Paid weekly (Direct Deposit or ATM Debit Card available)
• Access to health benefits and retirement plan
• A personal recruiter to help with job searches and assistance when at work!
• FREE ONLINE skills training

Job Requirements

• Attend to detail
• Basic Math
• Able to multi-task and identify problems

Job Responsibilities

• Follow safety guidelines, and additional PPE where required
• Follow standard work instructions as assigned
• Maintain a clean and organized workspace
• Troubleshoot equipment issues
• Meet production standards
• Inspection of product
• Accurate recordkeeping and quality documentation
• Machine set up and operation
• May work individually or in a team environment

Working For Westaff

Westaff is a nationwide professional staffing firm with more than 70 years of recruiting and selection expertise to match job candidates with positions where they will succeed. As the specialty franchise division of EmployBridge, the nation’s largest industrial staffing company with over 400 locations, finding your ideal job opportunity has never been easier. Through our extensive network of clients, we can introduce you to a variety of administrative, clerical or light industrial opportunities. We’re dedicated to getting good people good jobs.

Westaff has partnered with an established printing facility on the East side of Lancaster and is seeking Packing Associates to join the team!

Job Title: Packer

Pay Rate: $16.00/hour

Shifts Available:

• 2nd Shift 3:00pm – 11:30pm Monday – Friday
• 3rd Shift 11:00pm – 7:00am Sunday – Thursday

Tasks to Perform:

• Packing Printed Material from Advertisements to labels
• Pick product up from conveyor and place in boxes
• Place boxes in cartons & wrap to be shipped

Perks: 

• Benefits Available: Medical, Dental, Vision
• Referral Bonuses
• Employee Discounts through Working Advantage
• Access to FREE online classes through Penn Foster, as a part of the Better Worklife Academy
• No Screening Fees
• Temp to Hire Opportunity