Assembly 

Essex Jct., VT 

$21.50/hr 

1st Shift 6:00 AM to 3:30 PM

Responsibilities:
• Using pre-assembled frames; assemble bottom sheets, insulation boards,
interior liners, sides, tops, and backs of product.
• Fasten parts using appropriate pneumatic and manual tools, jigs, and
fixtures
• Apply final finishes (doors, racks, and trim accessories) to all stainless steel
• Install assembled components in product
• Provide assistance in other areas insulating, welding, final assembly,
blending, crating, etc.
• Must be able to read  orders and understand which parts are required

Qualifications:
• Able to follow direct instructions
• Completes tasks in a timely manner
• Able to lift up to 50 lbs., bend, sit, and stand repeatedly
• Knowledge of shop measurement
• Able to work with hand/power tools and read various measuring instruments
including voltmeters and calipers
• Commitment to maintenance of a clean organized and safe work
environment.

APPLY TODAY!

MIG Welder

Essex Jct., VT

1st Shift  |  $22.50-$29.00 DOE

 Responsibilities & Requirements:

• Weld manufactured parts into sub-assembled fixtures

• Locate position of parts and spot weld parts.

• Adjust heat, weld times, and tips for proper welding.

• Manufacture sub-assemblies of varying sizes, grades of steel, and complexity from detailed drawings.

• Must be able to read orders and understand which parts are required to weld

• Able to follow direct instructions

• Able to read welding blueprints

• Build stations correctly, detail oriented

• Read and follow basic Bill of Materials

• Has thorough knowledge of assembly

• Able to work with hand/power tools and read various measuring instruments including voltmeters, calipers, and spot gun

• Able to read and understand blueprints

• Good paperwork and counting skills. 

•Able to work and interact in a “Team” oriented department

APPLY TODAY!

1st Shift Warehouse Janitors needed in St. Albans, VT 

Shift: Mon – Fri days

Payrate: 18.75

Duties include:

• Maintaining cleanliness of offices and warehouse 
• Clean and restock bathrooms
• Empty trash
• Clean floors 

Apply today!

1st Shift Warehouse Openings in St. Albans, VT

Hours:8am-5pm, Monday-Friday

Pay: 17.75/18.75 depending on position

Warehouse experience preferred but will train. Excellent time and attendance required. 

Apply Today!

2nd Shift Warehouse Openings in St. Albans, VT

Hours: 4pm – 12:30am Mon. – Fri., Sun. – Thurs.

Pay: 18.50-19.50 depending on position 

Warehouse experience preferred but will train. Excellent time and attendance required. 

Apply Today! 

Westaff is hiring a Service Technician for a company located in Lafayette, LA

Pay: $16/ hour

Hours: Mon- Fri 8am- 5pm

Responsibilities:

• Maintains equipment by cleaning, inspecting, basic repairs, and testing.
• Updates service logs to reflect service rendered & parts utilized.
• Participates in training on various types of equipment used in the field.
• Maintains a basic working knowledge of all equipment types and preventative maintenance procedures for each.
• Participates in quarterly Physical Inventory counts.
• Works in Smartsheets to provide servicing data
• Other PM duties as assigned.

Qualified Candidates, APPLY TODAY!

#westaffjobs

Westaff is seeking an EXPERIENCED Painter/Maintenance Tech for a company located in Crowley, La.

Hours: Mon-Fri 8:00am- 4:30pm

Pay: $13.77/ hour

**This position requires cleaning & repairing multiple vacant housing units to make ready.

Main Activities include but are not limited to:

• Clean areas to prep for painting
• Painting surfaces
• Touch up paint in areas that need
• Change light bulbs
• Replace filters on air conditioning/ heating units
• Replace light switches/ face plates

If you have experience as a Painter & Maintenance Tech,

APPLY TODAY FOR IMMEDIATE CONSIDERATION!

#westaffjobs

Westaff Hiring Maintenance Supervisor for Metal Stamping Manufacturer in Farmington, CT!

Salary: Up to $100,000/yr (based on experience)
Department: Maintenance/Tooling Department

We are seeking an experienced Maintenance Supervisor to lead our Maintenance Department as our current supervisor approaches retirement. This role offers a stable first-shift schedule and an opportunity to guide and develop a skilled team!

Key Responsibilities:

• Supervise the Maintenance Department team on 1st shift.
• Train and mentor apprentices; ensure proper skill development and adherence to safety and quality standards.
• Oversee daily maintenance operations and ensure timely completion of repairs.
• Apply machinist or tool-making expertise to fabricate, repair, and maintain equipment.
• Manage preventive maintenance schedules and contribute to continuous improvement efforts.
• Troubleshoot and repair mechanical systems; experience working with power press machines is strongly preferred.
• Support maintenance on metal stamping equipment, progressive dies, and related tooling.

Qualifications:

• 5+ years of supervisory or lead experience in maintenance, machining, or tool-making.
• Journeyman Machinist or Journeyman Toolmaker required, due to the need for apprentice training.
• Strong mechanical troubleshooting, machining, and fabrication skills.
• Experience with metal stamping, progressive tools & dies, and power press machinery is a significant plus.
• Strong communication, leadership ability, and commitment to maintaining a safe work environment.

Why Join Us?

• Opportunity to lead a skilled team and support a smooth transition as the current supervisor retires
• Hands-on role with strong influence on training and departmental development

  Apply today!!

#westaffjobs30

Westaff is Hiring for a Maintenance Technician in Shelton, CT!

Shift: Night Shift, 3:30pm – 12am 

Pay Rate: $26.00 – $30.00 an hour, depending on experience

Maintenance Technician Responsibilities:

• Performs facility-related duties and record keeping as required.
• Installs and repairs of leaking pipes, clogged pipes and air lines, etc., as well as electrical and lighting fixtures.
• Performs light welding and carpentry duties.
• Performs seasonal duties regarding grounds keeping, including snow removal.
• Maintains and installs facility-related equipment, such as compressors, tower water systems, heating and A/C system, elevators, lifts, exhaust fan units.
• Maintains and installs production-related equipment, such as tow motors, grinders, dust collectors, stretch wrap machines, gantries, trolleys, and hoists.
• Maintains company vehicles.
• Carries beeper for 24-hour access in case of emergency maintenance of air compressors, boiler, and furnace; on-call for seven-day period on a six-week rotating basis; may have to work a holiday if down time provided; must be able to work occasional overtime.
• Must maintain regular and consistent attendance.

Maintenance Technician Qualifications:

• Minimum of eight years of related experience and/or training.
• Certificates in welding, boiler repair, electronics, auto repair, and related fields a plus.
• Must possess and maintain a CT driver’s license.
• Ability to communicate one-on-one and in groups, complete task sheets, and follow Standard Operating Procedures (SOPs).
• Ability to understand instructions and troubleshoot problems.
• Ability to work independently from blueprints, work orders, and schematics.
• Ability to add and subtract two-digit numbers and to multiply and divide in all units of measure. Ability to perform these operations using units of weight measurement, volume, and distance.
• Knowledge of auto mechanics. Ability to operate a plow truck. Ability to perform occasional work from ladders at heights above 10′.
• Ability to use electronic testing equipment and meters.
• Computer experience is a plus.

Apply Today to the Maintenance Technician Position for Immediate Consideration!

#Westaffjobs30 

Westaff is Hiring for a Machinist in Shelton, CT!

Shift: Monday – Friday, 7am – 3:30pm 

Pay Rate: $27.00 – $35.00 an hour, depending on experience 

Machinist Responsibilities:

• tolerances of finished work pieces, sequence of operation for fabrication, and setup requirements of work pieces and machine tools.
• Sets up and operates machine tools such as lathes, milling machines, and surface grinders to fabricate parts and verifies conformance of machined parts to specifications.
• Calculates and sets controls to regulate machining parameters such as speed, feed, coolant flow, and depth and angle of cut, and/or enters commands to retrieve, input, or edit computerized machine control data.
• Starts and observes machine operation to detect malfunctions or out-of-tolerance machining and adjusts machine controls or control media as required.
• Verifies and documents critical dimensions and alignment of thermoform tool and components assemblies per inspection procedures using calipers, micrometers, height gauges and other measuring instruments.
• Must maintain regular and consistent attendance.

Machinist Qualifications:

• Communication: Ability to communicate one-on-one and in groups. Ability to understand instructions and follow standard operating procedures (SOPs).
• Logical reasoning: Ability to carry out detailed written and oral instructions. Ability to solve problems.
• Mathematical: Ability to work with mathematical fundamentals of shop math, including geometry and trigonometry.
• Technical: Understanding of how thermoformed (sheet) plastic is formed.
• Machinist with a minimum of five years of experience in machine shop with the ability to demonstrate proficiency in the setup and operation of all shop machine tools, inspection equipment and methods, and tool repair procedures.

Apply Today to the Machinist Position for Immediate Consideration!

#Westaffjobs30

Westaff is Hiring for a Warehouse Operator in Shelton, CT!

Shift: Rotating Shift 

Pay Rate: $20.25, $0.75 shift differential 

Warehouse Operator Responsibilities:

• Acquires and maintains skill certifications in order to properly use forklift, reach truck, and electric pallet jacks. Also, able to use tilt table, weight scale, battery exchange, stretch wrap or other equipment.
• Performs routine pre-operational check of forklifts daily and clean as needed in accordance with checklist
• Locates and distributes materials to departments as directed.
• Conducts inventory cycle counts as directed.
• Accurately prepares, inputs, and processes various reports, paperwork, or other administrative duties, manually or with computer using programs such as TMM, Word, Excel and e-mail. Properly document all material movements.
• Examines incoming shipments, rejects damaged items, records shortages, and reports deficiencies or problems to supervisor or purchasing department.
• Must maintain regular and consistent attendance.

Warehouse Operator Qualifications:

• Ability to take direction and communicate.
• Ability to read and understand written documents, such as safety rules, operating and maintenance instructions, and procedure manuals.
• Ability to understand detailed written or oral instructions. Ability to troubleshoot problems. Ability to understand Standard Operating Procedures (SOP’s).
• Ability to perform simple addition and subtraction.
• Ability to operate electric forklifts, electric pallet jacks, and reach trucks safely.
• Ability to work with computers or computer-based equipment.

Apply Today to the Warehouse Operator Position for Immediate Consideration!

FT 2nd Shift Warehouse Associates Needed In Milton, VT

Pay:$21/hr

Shift: Sun 3pm-12:30 Mon -Thurs 4pm-12:30

This job will be working the pick pack operation, dock area and or invoicing station.  Warehouse Associate will be trained to be able to work all departments of the nightly operations.  Must be able to lift 50 lbs.

Veterans and Military encouraged to apply!

Westaff is Hiring for a Production Machine Operator in Shelton, CT!

Shift: 1st Shift, Monday – Friday, 7am – 3:30pm 

Pay Rate: $27.00 – $35.00 an hour, depending on experience 

Position Overview:

Machine Operator position is primarily responsible for ensuring the machine is operational and functioning effectively, efficiently, safely and the product meets quality expectations. In addition, the Machine Operator position provides training, leadership and support to employees working on the production line.

Machine Operator Responsibilities:

• Functions as the leader on the production line.
• Partners with leads, mechanics and other production employees to address production issues and implement solutions.
• Loads and unloads material rolls from machines, verifies and sets machine settings per the sheet settings in a safe manner.
• Manages proper and timely starts/stops/restarts for machine, removes scrap and rewind.
• Assists with machine set up.
• Performs general production activities to ensure efficient production of high-quality product.
• Operates thermoforming, automation, and auxiliary equipment (i.e., case tapers, grinders, stackers).
• Inspects finished or in-process products against company standards and specifications for irregularities or reject.
• Ensures compliance with regards to line clearance, raw materials, in-process inspection, manufacturing, and housekeeping.
• Conducts basic preventative maintenance, cavity changes and other technical duties.
• Troubleshoots machine for quality issues.
• Maintains documentation and performs administrative tasks relevant to plant operations.
• Collaborates with shift supervision to understand and develop training needs, structure, and individual progress for assigned shift.
• Ensures work area is maintained in order and is free of unused items, carts, machinery not in use to mitigate safety hazards and maintain good housekeeping practices.

Machine Operator Qualifications:

• Minimum of 6 months experience in a manufacturing environment or similar relevant experience.
• Qualify to operate various lift trucks used in production and in the warehouse.
• Strong Interpersonal skills, facilitation, and communication skill, both verbal and written
• Critical thinking skills, problem resolution, strong decision-making ability to self-perform, and make decisions regarding the sequence of set-ups, operations, and processes, including minor modification or pre-programmed computer routines within limits of recognized standard methods and procedures.
• Strong proficiency in MS Suite (Word, Excel, Access), experience in data acquisition preferred.
• Read micrometers and calipers, digital force gauge, protractors, pressure gauges, temperature thermocouples.

Apply Today to the Production Machine Operator Position for Immediate Consideration!

Westaff is Hiring for a Setup Mechanic in Shelton, CT

Shift: Rotating shift

Pay Rate: $28.00 an hour, $0.75 shift differential 

Setup Mechanic Responsibilities:

• Installs tooling and performs set-ups, as well as corrective and preventative maintenance on thermoforming machines and auxiliary equipment, such as grinders, vacuum pumps, motors, gear boxes, and hoists.
• Conducts mechanical, pneumatic, and electrical troubleshooting.
• Performs root cause analysis to identify causes of defects and troubleshoots problems.
• Identifies, retrieves, and replaces machine components from the stockroom; creates and fulfills orders via a cloud-based parts management system.
• Escalates issues to a set up technician (recognizing source and scope of problems and communication).
• Must maintain regular and consistent attendance.

Setup Mechanic Qualifications:

• Previous mechanical or electrical experience preferred. Thermoforming, extrusion machinery, or packaging equipment highly desired.
• Able to read and understand written documents, such as safety rules, operating and maintenance instructions, and procedure manuals.
• Ability to carry out instructions furnished in written, oral, and diagram forms.
• Ability to troubleshoot problems.
• Ability to add, subtract, multiply, divide, and calculate decimals and fractions. Ability to understand and use the metric system.
• Ability to use calipers, tape measure, protractors, pressure gauges, temperature thermocouples.
• Ability to use cloud-based parts management system (NexGen) to create and execute work orders.

Apply Today to the Setup Mechanic Position for Immediate Consideration!

#Westaffjobs30

Westaff is hiring a PAP Tech for a Medical Company in Lafayette, La

Pay: $16 /hour

Hours: Monday-Friday 8am-5pm

Responsibilities:

• Assess and grade used PAP machines
• Clean used PAP machines

APPLY TODAY for immediate consideration!

Westaff is looking for a Material Handler/Forklift Operator in Mansfield, MA for Immediate Start!

Pay Rate: $22/hr

Shift: 1st Shift 8:00am-5:00pm Monday-Friday

Location: Mansfield MA

Job Duties:

Operates a forklift.
Performs all material handler functions.
Meets unit quality and productivity metrics.
Completes paperwork thoroughly and promptly.
Performs housekeeping tasks to maintain a safe work environment.
Accurately and courteously load client merchandise.

Benefits for working with Westaff:
Weekly Pay!
Free Online Skill Building Courses
Medical, Dental, and Vision

Apply now for our Material Handler/Forklift Operator Position!

Assists in the Set-up and operation of a Slitting Machine to produce a quality product in accordance with predetermined specifications and in accordance with predetermined production schedules by performing the following duties. Essential Duties and Responsibilities: include the following. Other duties may be assigned. ? Responsible for assisting the Slitter Operator in set-up, loading, adjusting, operation and unloading the slitter in a manner which will produce a quality on-time product with the utmost efficiency. ? Assists in maintaining accuracy and traceability throughout customer order. ? Assists in maintaining customer specifications throughout customer order. ? Maintains accuracy of product weighing. ? Palletizes material to customer specifications. ? Cuts up and properly identifies rework. ? Maintains proper safety and housekeeping practices at all times. ? May act as operator in his/her absence. Supervisory Responsibilities: N/A Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience: High school diploma or general education degree (GED); or one to two years related experience and/or training; or equivalent combination of education and experience. Language Skills: Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Mathematical Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret

Maintenance Electrician needed to troubleshoot, repair and improve equipment. Work independently problem identification through completion to ensure successful implementation and start up. Manage all safety, scheduling and training aspects of repairs, projects & trouble shooting in manufacturing environment. At least 5 years relevant electrical technician Capable of interpreting & applying NEC, NFPA, OSHA codes Familiar with NEC, NEMA, NFPA, OSHA code compliance’s. Familiar with 3 phase electrical power applications. Experience with RS500, Rs5000 & Siemens Control PLC programming. Must be able to use basic shop equipment drills, presses, band saw, mill etc. Above average mechanical skills. Experience running EMT & rigid conduit. Detail oriented & strong organization skills. Ability to read & interpret electrical & mechanical schematics & prints. Must be able to work in a safe manner around other people & equipment. Team player & effectively collaborate with different functional groups and customers when needed.

Westaff is looking for a financial CONTROLLER in Wallingford, CT

Hours: Monday-Friday 8am-5pm

Pay: 100-130k Depending on experience

Controller Primary Functions

A Controller oversees all accounting operations across our dealership network. They are responsible for financial reporting, budgeting, internal controls, and compliance, while working closely with executive leadership to drive strategic decision-making. This is a high-impact role for a results-driven professional with automotive industry experience.

Controller Responsibilities:

• Manage all accounting functions including general ledger, payroll, and financial reporting
• Prepare monthly, quarterly, and annual financial statements
• Oversee budgeting, forecasting, and cash flow management
• Ensure compliance with state and federal regulations, including tax filings
• Lead and mentor a team of accounting staff across multiple locations
• Collaborate with department managers to optimize financial performance
• Implement and maintain internal controls and dealership accounting best practices

Controller Requirements:

• MUST HAVE 5+ years of experience in an automotive dealership environment
• MUST HAVE strong knowledge of dealership management systems (e.g., CDK)
• Proven reliability, leadership and team management skills
• Excellent analytical, organizational, and communication abilities
• High level of integrity and attention to detail

Apply today for Immediate Consideration!

#westaffjobs30

Westaff is hiring Material Handlers in St. Cloud, MN!

Pay: $24/hr

Schedule: Monday to Friday 7 am to 4 pm

WESTAFF is actively recruiting for Pharmaceutical Production Operators in the Durham, NC area with immediate openings (2^nd Shift).

Pay: $18.00

2^nd shift: 3:30pm-11:45pm Monday – Friday

Pharmaceutical Production Operators Responsibilities: Must have some if not all of these requirements.

• Package/Assemble/Label material as detailed in the batch document within secondary production rooms while in accordance with clinical services SOP’s and cGMP’s. Attention to detail is crucial.
• Must be able to Package/Assemble/Label materials-cold conditions.
• Preform and ensure that through routine cleaning of packaging rooms is performed according to appropriate SOP’s and current cGMP’s.
• Ensure that all Logbooks and Cleaning System Forms are completed per SOP’s. 
• Count and read materials required for use in packaging operations.
• Must be able to work in contained processing operations.

Preferred Knowledge: Pharmaceutical or similar GMP environment.

Must be able to work in cold conditions for extended periods of time.

Minimum 1-year experience.

Benefits

• Weekly Pay
• Free online Skill Building Training

Members of the Military and Veterans encouraged to apply!

PLEASE INCLUDE UPDATE RESUME FOR CONSIDERATION

Westaff is seeking a Medical Equipment Driver & Customer Service Representative for a local healthcare company in Cheyenne, WY!

Schedule: M-F, 8am-5pm, on call every 3 to 4 weeks

Term: Permanent

Pay: $18 – $20/hour DOE

Notes:

– NOT a VA location

– Area coverage: 100 Miles in all directions

Responsibilities:

*Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions.

Qualifications:

Employment is contingent on

• Background investigation (company-wide)
• Drug screen (when applicable for the position)
• Valid driver’s license in state of residence with a clean driving record (when applicable for the position)

• High school diploma or GED equivalent, required
• Experience with medical equipment, preferred
• One year of related work experience, preferred
• Medical terminology, preferred

• Accurately perform simple mathematical calculation
• Maintain confidentiality, discretion and caution when handling sensitive information
• Work independently and as part of a team
• Microsoft applications; Outlook, Word and Excel

• Office equipment; fax machine, copier, printer, phone and computer and/or tablet
• Mechanically inclined for the repair and troubleshooting of equipment
• Successfully demonstrates loading, unloading and proper tie down procedures as per company policy of transported cargo
• Understands use of all applicable home respiratory equipment and supplies
• Ability to write up reports (as seen in positions that install services or products in customer homes)

• Lift and carry office equipment at times
• Requires sitting, walking, standing, talking and listening
• Requires close vision to small print on computer and/or tablet and paperwork
• Requires lifting (minimum of 65 pounds) and transporting of patient equipment
• Requires contact with patients and equipment with potential exposure to contagious pathogens
• Requires driving a company vehicle for the majority of the workday
• Required to comply with company Respiratory Protection & N95 Mask Fit Testing Policy
• Medical Evaluation and Fit Testing Compliance in a timely manner 
• Annual Recertification 
• Keep face clean-shaven to ensure N95 Mask face-seal protection per OSHA guidelines

Veterans & Military encouraged to apply!

Paralegal

Location: Southwest Indianapolis
Full-Time | Monday–Friday | Day Shift
Pay: $20/hour

We’re hiring a detail-focused Paralegal to support litigation and legal operations. This role involves research, document drafting, case support, and maintaining confidential records. If you’re organized, analytical, and comfortable handling sensitive information, this is a strong opportunity to build experience in a professional legal environment.

Responsibilities

• Assist Legal Counsel with litigation support

• Conduct legal research using statutes and case law

• Draft affidavits, pleadings, discovery responses, and legal notices

• Coordinate subpoenas and public records requests

• Maintain indexed legal files and confidential documentation

• Liaise with external legal partners as needed

Required Qualifications

• High school diploma or GED

• Paralegal certification and 2 years of paralegal experience

• At least 2 years of basic computer experience

• Strong attention to detail

• Clear, professional written and verbal communication

• Experience handling confidential or sensitive information

Highly Desired

• 2 years’ experience with LexisNexis and Westlaw

• Experience developing procedures or programs

• PACE, CORE, or CLA/CP certification in good standing

• Associate’s degree (or higher) in Paralegal Studies with certification

Benefits

We offer competitive medical coverage, retirement savings options, and access to free education and skills training programs. Full benefits summary available here:

Apply today if you meet the required qualifications and are ready to support a high-functioning legal team.

#westaffjobs

Westaff is hiring Kitters in Quincy, MA

Benefits to our Westaff Associates:

• Medical
• Dental
• Vision
• Retirement Savings Plan
• FREE Online training
• WEEKLY PAY

Schedule of the Kitters in Quincy:

• Monday – Friday
• 11am – 7:30pm
• $18.50

Overview of the Product Builder I

Member of a production team whose goal is to assemble required components, operate equipment, inspect in-process medical devices / kits while always maintaining the quality and integrity of the product,

Responsibilities of the Kitters:

• Builds product by following all processes in which certified and complete other assigned work.
• Responsible for quality and 100 % adherence to manufacturing process requirements, and the Quality Policy
• Proactively identifies and communicates quality issues and concerns
• Maintains accurate records including training an shop floor paperwork (SFP)

Qualifications for the Kitting position:

• High school diploma/degree/equivalent
• Prior experience working in a fast-paced environment while requiring a high level of accuracy
• Good written and spoken communication skills
• Ability to use computers at a basic level
• Ability to lift up to 35 lbs occasionally

Apply now for our Kitter position in Quincy, MA

Westaff is seeking Production Assemblers for our client in Salem MA!

Benefits of working with Westaff include:

Health, Vision, Dental

Weekly pay

Free online courses

Hours for the Production Assemblers: 8:00am- 4:00pm

Good attendance is a requirement.

Production Assemblers Job Overview:

• They will be using hand tools and assembling product.
• Experience in assembly using small tools such as screw driver, pliers and snips.
• Lifting up to 50 lbs on occasion.
• Ability to follow written and verbal instructions.
• Work with small team environment.
• Standing required.

The Production Assembler will become an integral addition to our production team. He or she will assist in all daily production activities. The optimal candidate will be eager to learn and grow within our company.

Duties and Responsibilities:

•  Assist in all manufacturing and assembly processes
•  Product assembly- Using hand tools (drills, picks, wrenches)
•  Taking inventory of components and finished goods
•  Testing finished goods for quality assurance
•  Cleaning workstation and warehouse
•  Packaging finished goods

Job Skills and Qualifications:

•  High school education or equivalent (GED)
•  Must be able to lift 50+ lbs.
•  Job duties include standing for 6-8 hours
•  Warehouse or production experience preferred
•  Production line experience preferred

Apply now for the Production Assembler role in Salem MA!

Westaff is hiring for an Industrial Seamstress position in Lafayette, LA

Pay: $11-$15/hour

Hours: Monday- Friday 8am-5pm

Qualifications:

• Previous factory sewing, or upholstery experience preferred
• Ability to read and follow instruction manual
• Able to read tape measure
• Able to work standing most of day
• Able to perform teamwork and maintain a positive attitude
• STRONG leadership ability
• Responsibilities:
• Measure and cut rope, windows, and other materials
• Rope and tie shields
• Keep accurate counts
• Label and package items
• Perform quality control work
• Assist in gluing, organizing, and any other tasks that support sewing
• Handle job order paperwork
• Assist with inventory control
• Able to multi-task in a fast-paced environment
• Assist with designing bags (calculating dimensions, etc)

Qualified Candidates, APPLY TODAY!

#westaffjobs

Data Entry Clerk – 1st Shift
Monday–Friday | $15/hr | Weekly Pay

We’re hiring a detail-oriented Data Entry Clerk to join our team. If you’re organized, accurate, and thrive in a structured environment, this is a great opportunity to grow with a stable company.

Responsibilities:

• Enter and verify data with a high level of accuracy

• Review documents for errors and discrepancies

• Maintain organized digital records

• Provide general administrative support

Qualifications:

• Strong attention to detail (accuracy is required)

• Basic computer skills (Microsoft Office, especially Excel)

• Reliable and able to meet deadlines

• Previous data entry or clerical experience preferred

Competitive weekly pay, consistent Monday–Friday schedule, and opportunity for long-term growth. Apply today.

Westaff is hiring a Bilingual Shipping Coordinator for our client in Salisbury, MA

Benefits to our Westaff Associates:

• Medical
• Dental
• Vision
• Retirement Savings Plan
• FREE Online Classes
• WEEKLY Pay

Schedule of the Shipping Coordinator:

Monday – Friday

2nd Shift: 2:45pm – 11pm

Shipping Coordinator Job Duties:

• Follows the requirements of assigned schedule to meet shipping demand.
• Sets up orders based upon established specifications.
• Stages boxes to assemble orders for shipping.
• Adjusts order forms to reflect status of shipping orders.
• Moves material in and out of stocking locations with scanner.
• Associate Can effectively use trailer management transaction ZTSCHD in SAP to create trailers and assign forwarding agent number, seal number (if applicable), pickup dates for each delivery within each trailer.
• Associate can effectively print all BOL’S, packing slips, commercial invoices (if applicable) and enter tracking numbers and booking numbers (if applicable) for all deliveries within trailer management in SAP.
• Associate can effectively communicate with customer service, carriers, planning and our international logistics specialist via email or phone to update on order status, tracking, and requests for updates.
• Associate can effectively process and ship through subcontracting (sterile shipments) in sap using transaction (ZME2O).
• Associates can effectively run and comprehend all basic warehouse transactions related to inventory lookups, trailer management, sales order lookup, deliveries, receiving, order processing.
• Associate can effectively troubleshoot handling units(repack) if discrepancies or changes have been made.
• Associate is trained in conducting consumables inventory counts and ordering materials as needed.
• Associate can effectively create cycle counts using SAP transaction LX16 and is familiar with entering counts using SAP transaction LI11N/LI12N.
• Completes any required paperwork. 
• Perform cycle counts as required.
• Cleans area and any assigned equipment.
• Notifies Supervisor of any problems.
• Completes projects and tasks as assigned.
• Advises the Warehouse Manager on issues and improvements pertaining to areas of responsibility.
• Ensures proper inspection for quality of goods packed.
• Advises superior on issues regarding safety.
• Ensures the compliance of procedures to all company policies.
• Any other reasonably related duties as assigned by supervisor or other higher-level managers.

The Ideal Candidate for the Bilingual Shipping Coordinator:

• Effectively communicates with customers and managers
• Speaks fluently in Spanish and English
• Has high school or equivalent education
• Has at least 1 year experience 

Apply now for the Bilingual Shipping Coordinator in Salisbury MA!

Westaff is looking for 2nd Shift Assemblers in the North Kingstown RI area for IMMEDIATE HIRE!

Pay:$20.00/hr

Hours: 3pm-1:30am Mon-Thursday

Assembler Duties:

Make sub-assemblies of printed circuit boards with applicable components.
Assemblies printed circuit boards by insertion of applicable components in through hole fashion utilizing specific work instructions, procedures and various hand and air tools.
Minimum six months production work experience preferably from within a manufacturing industry.

Benefits:

Weekly Pay!
Permanent Opportunity
Free Online Skill Building Training
Medical, Dental, Vision & Retirement Savings Plan

APPLY TODAY for IMMEDIATE CONSIDERATION for our ASSEMBLY job!
Members of the Military and Veterans Encouraged to Apply!