Job Not Found

WESTAFF is looking for a PNC/CNC Machine Operator specializing in deep drawing and metal spinning for a company in the Hialeah area.

Schedule: M-Th 6am-3:30pm & F 6am-10am

Pay: $16 to $25 based on experience 

PRIMARY FUNCTION:

Operating specialized metal spinning PNC/CNC lathes used for manufacturing production tooling and products in sheet metal spin and deep draw forming.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Complete machine setup to Load parts on machine, actuate machine, and unload parts.
• Complete machine setup to Load parts on machine, actuate machine, and unload parts.
• Manually clean parts and/or wipe as needed.
• Pack parts into cardboard boxes or other appropriate packaging.
• Stack boxes on skid and band as needed.
• Other duties as instructed by foreman.

QUALIFICATIONS:

• 1 – 2 Years of Experience in the related Manufacturing Environment
• Preferred Technical / Trade School Education and/or Journeyman’s Card
• Computer Savvy, CNC programming
• Manual and CNC Lathe set-up
• Proficiency in Reading Mechanical Drawings
• Measuring with Micrometers, Calipers, and other Q.C. Equipment
• Must be a US Citizen or Perm Resident
• Language Skills - Ability to read and write English. Ability to speak in English fluently.
• Bilingual is preferred (Spanish).
• Work Environment: While performing the duties of this job, the employee is typically in a non air-conditioned warehouse. Employee may be exposed to wet and/or humid conditions; moving mechanical equipment; and fumes or airborne particles. The noise level in the work environment is usually moderate.

Benefits after Hired Permanent:

• Excellent Medical, Dental, and Vision Programs
• 401K and Matching Participation Plan
• Profit Sharing
• Bonuses
• Vacation
• Life Insurance
• Short and Long Term Disability

Westaff is Hiring Manufacturing Packers and Printers for the Hialeah area. 

• Shift is 6:00AM-2:30PM Plus OT when needed
• Monday-Friday 
• Pay is 10.00/HR

Job Duties:

• Packers will assist in packing items from the conveyor. 
• Must be able to stand for entire shift
• Seal boxes and prepare them for shipment

Spanish is required

Experience with packing a plus!

One of the leading shading fabricators in the United States is seeking skilled workers for their Assembly department.

Shift: Monday to Thursday 2:30pm to 1:00am

Pay: $12.50 per hour

Job Description:
Employee reads over order paying close attention to all notes on order. Ensures the shade that is hanging in front of them is correct fabric, no flaws (ie. Hole in fabric, dirty, print is straight). Once shade has been verified quality is perfect puts shade back onto cart

Skills Required:
Detail oriented, Quality Focus, manufacturing experience, Spanish only okay.

A plastic manufacturing company in the Hialeah area is seeking Production Workers, this is a long-term opportunity.

Schedule: Monday to Friday - 3:00 pm- 11:30 pm.

Paying: $12 Per hour

Duties:

• Production workers will feed the machines with plastic pellets.

• Finished Products will be taken off the line and packed.

• Making sure finished goods don’t have defects.

Requirements:

• Previous experience in production environments is critical, 6 months of experience.

• The ability to communicate in Spanish is necessary for this job.

Seeking Material Handler/ Forklift operator for paper recycling facility located in Ft Lauderdale area. 

Shift: Monday to Fridays between 6am-6pm (Saturdays when needed)

Pay: $12.50 Per hour 

Required Duties:

• Outdoor paper waste facility/ yard.

• Material handling of container filled of paper waste.

• Loading and unloading containers of paper waste.

Requirements:

• Certified 1-2 years forklift operator.

• Industrial warehouse experience.

• Flexibility and reliability.

• English or Bilingual (English and Spanish) speakers.

A leading manufacturer in the Air Conditioning/HVAC industry is looking for a Cost Accountant for their facility in Homestead.  

Shift: Monday to Friday 8:00am to 5:00pm

Salary $90,000.00 Annual Salary

Summary Job Description:

• The Cost Accountant is responsible for leading the standard cost for all parts, roll up product cost and price, compile Price List and MF, release to the Sales team, maintain, update and respond to query from Sales team on pricing matters.

• This position is also required to lead the team to ensure all production costs and costs of goods sold are captured timely and accurately.

• Responsible to ensure the bookkeeping of all inventory transactions are in place, item ledger and account ledger are interfaced properly.

• The position is also responsible on providing cost and margin analysis to support other departments for performance improvement and for Management decision making.

• Support the full implementation of JDE system.

• Follow up closely JDE related matters with JDE users to improve the operation process in JDE.

• To ensure all cost of production, production variances and cost of goods sold are captured timely and accurately in financial accounts to derive at accurate gross profit margin

Skills Required:

• Minimum 5 years’ experience in handling manufacturing costing/accounting.
• Analytical and problem-solving skills: Can objectively analyze data and problems and identify workable solutions.
• Communications Skills: Ability to communicate effectively with all levels of personnel to get cooperation for solution.
• Customer-centric, proactive and analytical with strong sense of commitment towards highest standards of service. 
• Knowledge of JD Edwards

One of the leading shading fabricators in the United States is seeking skilled workers for their Assembly department.

Company is located near Pompano Beach.

Shift: Monday to Thursday 2:30pm to 1:00am

Pay $ 12.50 per hour

Assembler Job Description:

• Employee matches the shade with the cornice
• Reads over the notes on the order paying close attention to notes/details.
• Once read over ensures cornice is correct size and chain size and color.
• Applies brackets into the cornice and ensures shade fits accordingly.

Skills Required:

• Detail oriented
• Quality Focus
• manufacturing experience
• Spanish only okay

***********************************************************

Uno de los principales fabricantes de cortinas en los Estados Unidos busca trabajadores calificados para su departamento de ensamblaje.

Horario: Lunes a Jueves 2:30pm a 1:00am

Pago $12.50 por hora

Descripción del puesto de ensamblador:

Empleado empareja la sombra con la cornisa
Lee las notas del pedido prestando mucha atención a las notas / detalles.
Una vez leído, se asegura que la cornisa tenga el tamaño correcto y el tamaño y color de la cadena.
Aplica soportes en la cornisa y asegura que la sombra se ajuste en consecuencia.

Habilidades requeridas:

Orientado al detalle
Enfoque de calidad
experiencia de fabricación
Español solo está bien

One of the leading shading fabricators in the United States is seeking skilled workers for their department to help measure and cut fabric.

Shift: Monday to Thursday 2:30pm to 1:00am
Pay $ 14.00 per hour

Job Description:

• Candidate must have math skills
• able to read tape measure and take deductions.
• Attention to detail is vital.
• Employee will read over order and pull correct fabric from the cart provided from Pullers.
• Ensure the roll pulled is correct fabric and cut accordingly.

Skills Required:

• 
  Detail oriented.
• Quality Focus, manufacturing experience.
• Spanish only okay.
• Candidate must have math skills.
• Previous construction or carpentry exp accepted

Distribution center of kitchenware and appliances for Hospitality hiring Pickers!

Shift: M-F 8AM-4:30PM + Flexible for OT (Including Saturday’s as needed) Pay: $12.00 per hour - Temp to Perm for the right person

Responsible for:

• Picking orders through the inventory in the warehouse.
• Uses ticket system to prioritize and locate orders to pick in the inventory.
• Neatly builds pallets with picked items for Shipping department.
• Capable of maneuvering with manual, and electric walking pallet jack.
• Delivers ticket to Shipping personnel to verify correct item was delivered.

Requirements:

• Must speak/read/understand English.
• Capable of using RF Scan Gun & Pallet Jack.
• Picking experience.
• Capable of lifting items that weigh up to 50 lbs.
• Very attentive to details, to insure the correct item and quantity of items are picked.
• MUST communicate in Spanish 

APPLY NOW 

Westaff is seeking to place a skilled Industrial Machine Operator /Production Worker for a leading coffee roaster and distributor in Miami for immediate hire!!

Shift 7am 3pm Mon-Thur, 7am-2pm on Fridays- flexible for overtime if necessary 

Pay $13.00 per hour

Industrial Machine Operator/Production Worker:

• Able to work in a hot/humid work environment- producer of coffee, operating industrial roasters and packing of product:
• Operate coffee roasting and packaging machinery (configuration of temperature on ovens)
• Feed raw coffee beans into machinery
• Monitor the production process
• Perform minor machine troubleshooting and maintenance
• Assembling packaging material and labeling for shipping building pallets and shrink wrapping
• Other related functions associated with production and manufacturing that management may assign 
• Able to carry and lifting more then 50 lbs and stand all hours of the shift

Benefits

• Weekly Payroll
• Permanent placement for the right candidate

Apply now for our Industrial Machine Operator/Production Worker now!!

Westaff is seeking to place a skilled Customer Service/Data Entry Clerk for a packaging solution provider located in Miami for immediate hire!!

Shift: 8am -5pm Mon-Fri

Pay: $ 15.00-16.00 per hour (DOE)

Customer Service/Data Entry Clerk:

• Working in a small quite work environment - intake of customers order request and processing order into internal database
• High volume data entry: important to have attention to details: quality, quantity ect
• Invoice customers for processed work orders by end of order shipping day. 
• Maintain file storage location and maintain customer's files  
• Enter work orders, and customers request forms 
• Process daily shipping schedule exceptions. 
• Process returned goods.
• Arrange delivery of completed orders. -
• Process material and design change requests. -
• English speaker required, bilingual (Eng/Span) a plus 
• High volume data entry and computer literate required
• Comfortable working in a quiet environment, and independently

Benefits:

• Weekly Payroll
• Permanent placement for the right candidate 

Apply now for our Customer Service/Data Entry Clerk position for immediate consideration  !! 

Cosmetics products manufacturer near Miami Lakes is seeking an Industrial Mechanic.

Pay rate: $17 Per hour 

Schedule: Monday to Friday 8am ~ 5pm (Flexibility for overtime)

Job Description:

• Assists and performs set-up of production lines.

• Follows all indications given by the Head Mechanic and superiors.

• Completes all tasks and assignments in a safe and timely manner.

• Strives for continuous self improvement to increase personal productivity.

• Observes mechanical devices in operation and listens to their sounds to locate causes of trouble.

• Dismantles devices to gain access to and remove defective parts.

• Examines form and texture of parts to detect imperfections.

• Inspects used parts to determine changes in dimensional requirements.

• Adjusts functional parts of devices and control instruments.

• Repairs or replaces defective parts.

• Installs special functional and structural parts in devices.

• Lubricates and cleans parts.

• Starts a device to test its performance.

• Sets up and operates lathe, drill press, grinder, and other metalworking tools to make and repair parts.

• Changes over equipment within predetermined standard of time.

• Maintains a continuous improvement process to lower product costing and/or add product value.

Manufacturer of Direct Mail Advertisements in Miami Lakes is Hiring for a Forklift Driver for their Production department.

Pay: $13 Per Hour

Schedule: Wednesday to Sunday 10:00PM-6:30AM

Responsibilities:

• Responsible for the operation of the sit-down forklift.

• Moves material within and from the warehouse to the production area, and returns finished products to the shipping area.

• Works closely with machine leads and site supervision for production of finished products.

• Support production machine changeovers.

• Moves all materials within production area and locates copy.

• Removes pallets, strapping and packing materials, and moves recycle materials to recycle area.

•  Receives and stores all postal equipment until needed by production.

• Weighs, and places in proper location all finished products following company guidelines.

Requirements:

• Preferred Production Line Factoring experience.

• Forklift Certified (sit down electric).

• Experience operating forklift in fast paced, narrow spaces.

• Capable of keeping up with rush order environment.

• Capable of unpacking pallets in addition to bringing pallets over on Forklift from Warehouse.

Westaff Benefits:

• Health, Dental & Vision insurance.

• Referral Bonus Program - Refer & Earn.

• Free Online courses w/ Penn Foster University.

• IRA - Retirement Savings Program.

One of the leading shading fabricators in the United States is seeking skilled workers for their Assembly department.

Shift: Monday to Thursday 2:30pm to 1:00am

Pay: $12.50 per hour

Job Description:

•  Employee reads over order paying close attention to all notes on order.

• Ensures the shade that is hanging in front of them is correct fabric, no flaws (ie. Hole in fabric, dirty, print is straight).

• Once shade has been verified quality is perfect puts shade back onto cart.

Skills Required:

•  Detail oriented.

• Quality Focus.

• Manufacturing experience.

• Spanish only okay.

Westaff is currently hiring a Receptionist for Medley, FL area.

Schedule: Monday to Friday 7:30AM-4:30PM

Pay rate: $15.00 Per Hour

Job Description:

• Answering phones.

• Proving support to clients to inform about company products.

• Take care of customer service pickups.

• Data entry.

• Order entry.

Skills:

• Bilingual (English/Spanish).

• 2 years previous experience.

Westaff is seeking a Purchasing Assistant for a Contract personal care product manufacturer / formulator and packager in the Miami area.

Shift: Monday to Friday - 8:30 am- 5:30 pm O/T flex

Pay Rate: $15 Per Hour

Job Description:

• Assist the R & D lab by sourcing and requesting samples and documentation as new products are developed.

• Collaborate with new business development by sourcing packaging materials.

• Process orders from our customers as these move from development to production and identify our requirements for fulfillment.

• Manage inventory, assessing on hand materials and new requirements.

• Research raw material alternatives and new suppliers to cut costs and expand our supply chain.

• Issue and track purchase orders, communicating regularly with suppliers via phone and email.

• Provide schedulers with expected arrival dates for materials and advise of any potential delays.

• Communicate with our customer service team members to ensure they have all of the information and support needed to maintain our customers current on the progress of their orders.

• Release orders to our manufacturing and production teams as soon as possible.

Skills Required:

• 2+ years of experience working in a manufacturing/purchasing environment.

• Strong verbal, written and interpersonal communication skills.

• Competence in basic math functions.

• Excellent attention to detail, time management, and organizational skills.

• Ability to analyze data, establish clear priorities quickly, and drive the decision-making process.

Westaff is seeking Production Workers for a Plastic Manufacturing Company in the Hialeah area!

Schedule: Monday to Friday - 3:00 pm- 11:30 pm

Paying: $12 Per Hour

Duties:

• Production workers will feed the machines with plastic pellets.

• Finished Products will be taken off the line and packed.

• Making sure finished goods don’t have defects.

Requirements:

• Previous experience in production environments is critical, 6 months of experience.

• Ability to communicate in Spanish is necessary for this job.

Westaff is seeking to place certified Warehouse Associates with forklift experience in Medley for a distributor for immediate hire!!

Shift: 8am -5pm Monday - Fridays 

Pay $12.00/hour

Warehouse Associate w/Forklift experience:

• Order pulling of products and  coordinating the shipping process as products are picked for delivery,
• Must be able to perform 90% manual labor, 10 % forklift operator
• Palletizing and shrink wrapping
• Loading and unloading
• Checking order against Bill of landing and other manifest 
• Production packaging and kitting when needed
• Able to carry and lift 50 lbs and stand all hours of shift  
• All other warehouse related functions as instructed by management

Benefits

• Weekly Payroll 
• Permanent placement for the right candidate 

Apply now for our Warehouse Associate position  !!!

Manufacturer of Safety Vests is looking for a Production Assembly/Packer with Excel knowledge for their facility in Pompano Beach FL.

Pay: $9.00 Per Hour

Shift: Monday to Friday 6:00am to 4:30pm

Responsibilities:

• Moves materials in the production floor from Point A to Point B.

• Packaging plates in organized style. Packing heavy items.

• Standing for long periods of time, stooping to package plates in boxes and onto pallets.

• Works in an area with a lot of Noise and Machinery.

• Basic updates to order status in computer system.

Requirements:

• Understanding of basic English.

• Standing for long periods and Requires bending Stooping, pushing, pulling and lifting up to 50 pounds.

• Basic computer skills in EXCEL.

• Very flexible schedule + overtime

• Requires lifting up to 50 pounds.

• Reliable transportation is a must.

Manufacturer of Safety Vests is looking for a Production worker for their facility in Pompano Beach FL.

Shift: Wednesday to Saturday 6:00am to 6:30pm

Pay: $9.00 per hour

Job Duties:

• Cut fabric according to work order instruction.

• Use hand tools according to work order. Use glue and adhesive.

• Use measuring device to verify quality of product meets work order specifications.

• Package plates weighing 15 lbs.

Requirements:

• Fast pace environment.

• Manufacturing industry experience.

• Able to lift 15 lbs.

• Requires understanding of basic English.

• Capable of standing for extended periods of time.

• Comfortable working in an environment with strong odors such as alcohol, glue, and other lubricants.

Manufacturer of Safety Vests is looking for a Production worker for their facility in Pompano Beach FL.

Shift: Sunday to Wednesday 6:00am to 6:30pm

Pay: $9.00 Per Hour

Job Duties:

• Cut fabric according to work order instruction.

• Use hand tools according to work order.

• Use glue and adhesive.

• Use measuring device to verify quality of product meets work order specifications.

• Package plates weighing 15 lbs.

Requirements:

• Fast pace environment.

• Manufacturing industry experience.

• Able to lift 15 lbs.

• Requires understanding of basic English.

• Capable of standing for extended periods of time.

• Comfortable working in an environment with strong odors such as alcohol, glue, and other lubricants.

Industrial Laundry seeking for 3rd shift Laundry Attendants for a 5 days project!

Flexible to complete the 5 day's project /$13.00 p/h - Long term for the right person / From 10:00 pm - 6:30 am

General description: Washing, Drying and folding Hotels & Resorts linens

Duties:

• Sorting Laundry
• Stain Treatment
• Operate and Maintain Machines
• Keep Track of Laundry

Requirements:

• Capable to lift up to 40 pounds
• Able to function in a fast-paced working environment
• Stand and move around for the majority of the day

APPLY NOW!

Manufacturer of Safety Vests is looking for a Production Assembly worker for their facility in Pompano Beach FL.

Shift: Sunday to Tuesday 6:00am to 6:30pm

Pay: $9.00 per hour

Requirements:

• Rectify orders with errors, informing Team Leader or directly with department involved.

• Scan and Process orders Enter purchase order information into spread sheet.

• Determine priority of order base on colors, large orders and emergency orders.

• Generate labels.

• Push carts with finished products weighing up to 50lbs.

Qualifications:

• Basic computer skills.

• Able to understand basic work and safety instructions in English.

• Able to lift 50lbs.

Large Manufacturer of Bullet Proof Defense products is hiring Sewing Machine Operator in Pompano Beach FL.

Pay: $8.65 per hour

Schedule: Sunday to Wednesday 6:00AM-6:30PM

Responsibilities:

• Sewing various materials together to create Bullet Proof defense products.

• Responsible for handling, positioning, and moving fabric through sewing machine.

• Use measuring tools such as measuring tape and rulers to measure garments.

• Complete repairs and reworks on all damaged or incomplete garments during the inspection process.

• Troubleshoot sewing machine to correct any defects in stitching or machine malfunction.

• Maintain an overall safe and clean work area.

Required Qualifications:

• Experience using a sewing machine.

• Production experience, following work orders, and/or written instruction.

• Comfortable working in an environment with strong odors such as glue or cleaners/disinfectants.

• Capable of measuring and using measuring tools such as tape measure and/or ruler.

• Attention to detail.

• Must be able to work with little or no supervision.

Westaff is seeking a Mobile Device Electronics Repair Technician for E-Commerce company in North Miami Beach area.

Pay: $15.00 Per Hour

Schedule: Monday-Friday 8AM-4:45PM

Primary Responsibilities:

• Take 2 defective cellular phones and pull parts from one to make the other work. (If display is functioning on one cellular device, however camera is broken, removal of the display would for reuse would be necessary.)

• Utilize small hand tools to remove and tear apart cellular parts without breaking.

• Utilize the computer for guidance "How-To" tutorials.

Requirements:

• Soldering experience is a plus.

• Experience working with small electronics (tablets, walkies, cellular phones, pagers).

• Capable of using small hand tools.

• Computer literate.

• Must be able to understand English Mechanically inclined.

• Ability to learn new skills.

Company is located near Griffin and Flamingo

Shift: Monday -Fridays 4:00PM-12:00AM

Pay $11.00 per hour

Indoor A/C facility

Attire: long pants and close toe shoes

Duties

• Assembling and or sorting mailing and fulfillment printing products
• Fast pace production assembling operation
• Package final printed material
• Other related duties as requested

Requirements

• Fast pace production work experience
• Manual assembling and packing speed
• Able to stand throughout shift
• Able to carry less than 20 lb

****************************************************

Imprenta ubicada en Davie / Weston están buscando trabajadores de producción para su turno de mañana.

La empresa está ubicada cerca de Griffin y Flamingo

Turno: Lunes a Viernes de 4:00pm to 12:00AM

Paga $ 11.00 por hora

Instalación de aire acondicionado interior

Vestimenta: pantalones largos y zapatos cerrados

Deberes

• Ensamblar y clasificar productos de impresión para envío y cumplimiento
• Operación de ensamblaje de producción de ritmo rápido
• Empaquetar material impreso final
• Otras tareas relacionadas según lo solicitado

Experiencia

• Producción de ritmo rápido
• Velocidad de embalaje y montaje manual
• Capaz de estar de pie durante todo el turno
• Capaz de transportar menos de 20 lb

Glass manufacturing company for the windows and doors industry seeking an Inventory Control- Cycle Counter!

Schedule: 7am to 4pm - Monday to Friday 

Pay: $15.00 per hour (OT if needed)

Job Description:

• Conduct scheduled physical counts of inventoried material in specific areas of the company and generates count reports

• Compare result of physical counts with Frontier records

• Determine root cause of count variances (i.e. material pulled by line and not recorded, material handling transfer error, bill of material inaccuracy, etc.) and proactively collaborate with other departments to remediate the issue and prohibit future occurrences.

• Post vetted cycle count adjustments to Frontier.

• Publish daily cycle count results and findings via email.

• Essential role in the preparation for and execution of quarterly physical inventory counts.

• Independently analyze count variances and propose plans for rectification.

• Prepare cumulative inventory adjustment reports and other data as required by Accounting, Material Planners, Supply Chain, etc.

• Ability to drive to offsite locations for weekly cycle counts.

• Determines causes of variances between computer records and physical counts, such as data entry errors, EC rule errors or worker error due to removing inventory without notation.

• Prepares for and helps conduct periodic physical inventory, as needed.

• Must be able to work effectively with other departments on problem resolution.

• Must be able to work independently with very little assistance.

• Ability to perform all job duties with accuracy and completeness. orderly fashion.

• Cleans work area after work is complete.

Skills Required:

• Proficiency in Microsoft Office, Frontier, and IBM Show Case Query.

• Physical inventory and cycle counting experience.

• Knowledge of PGT products and processes preferred.

• Must be able to count, multiply and divide.

Westaff is Hiring a Cycle Counter to work in the Inventory Control Department in the Hialeah Gardens area.

Shift is Monday-Friday
8:00AM-4:30PM Plus OT when needed.
Pay is $13.50/HR

Duties/Responsibilities:
• Perform daily cycle counts using cycle count sheets.
• Monitor and control inventory integrity.
• Maintain visual product identification, location, and lot code accuracy.
• Research inventory discrepancies and report to Inventory supervisor.
• Open cartons, bundles, and other finished goods and raw material containers to count items and/or weigh materials to determine quantity on hand.
• Report discrepancies of over/under amounts and any damaged products to the Inventory supervisor and Quality supervisor when required
• Keep updated records of inventory and activity logs

Requirements:

English or Spanish only
Experience with Cycle Counting

Leading uniform and soft goods manufacturer for the U.S. military and commercial organizations in Hialeah seeking for a Shipping Supervisor!

Pay: $16

Schedule: 7:00am to 3:30pm - Monday to Friday

Job Description:

• Verify sales orders before shipping.

• Prepare products for shipping.

• Maintain shipping documentation filing and storage.

• Conduct final Quality Control checklist inspection.

• Produce and maintain a stock of shipping supplies.

• Able to lift 50 lbs.

Skills Required:

• 3 Years Forklift driving experience (Certified).

• Bilingual (English Spanish).

• 3 Years as lead or supervisor.

• 3 years Warehouse & Shipping experience.

APPLY NOW!

Glass manufacturing company for the windows and doors industry seeking an Industrial Maintenance Technician!

Shift: Mon – Fri 4PM to 1AM flex for O/T / $18-$20 (depending on experience) p/h /Temp to Perm/ 1 week training during the day shift 7am to 4pm.

Job Description:

• Complies with all plant safety requirements, as well as other policies and procedures. Participates fully in the plant safety program.
• Uses all tools, materials, test equipment safely and efficiently. Is cognizant of personal safety and the safety of all others working in the vicinity.
• Performs PLC (Programmable Logic Controller) control level diagnosis by monitoring PLC programs and installs, calibrates, troubleshoots, maintains and repairs major electronic, electrical and mechanical systems and peripheral devices per manufacturer's specification.
• Reads complex electronic, hydraulic and pneumatic schematics, electrical wiring diagrams and shop drawings for the purpose of installation, troubleshooting and repairing of major systems and minor subsystems and components.
• Troubleshoots and installs safety and motor starter control circuits.
• Troubleshoots, installs, and calibrates various instruments, including ultrasonic level transmitters, flow meters, pressure transmitters, temperature transmitters, differential pressure transmitters.

Skills Required:

• Basic computer familiarity
• Read and use a tape measure preferred
• Read and perform mathematical calculations and measurements with numbers, fractions, and decimals normally acquired through high school education or equivalency
• Comparable experience in a manufacturing, or production facility is preferred
• Must be punctual and able to work overtime as needed, including weekends
• Ability to lift, bend, twist, walk, and reach frequently
• Must have the ability to lift and/or move up to 50 lbs. unassisted frequently
• Ability to stand and walk on concrete floor for eight hours or more
• Ability to wear company-issued safety shirt, hard hat, steel-toed shoes

APPLY NOW!

Glass manufacturing company for the windows and doors industry seeking an Inventory Control- Cycle Counter!

Temp to Perm / M-F 7am to 4pm + OT / $15-$19 depending on experience

Job Description:

• Conduct scheduled physical counts of inventoried material in specific areas of the company and generates count reports
• Compare result of physical counts with Frontier records
• Determine root cause of count variances (i.e. material pulled by line and not recorded, material handling transfer error, bill of material inaccuracy, etc.) and proactively collaborate with other departments to remediate the issue and prohibit future occurrences.
• Post vetted cycle count adjustments to Frontier • Publish daily cycle count results and findings via email
• Essential role in the preparation for and execution of quarterly physical inventory counts.
• Independently analyze count variances and propose plans for rectification.
• Prepare cumulative inventory adjustment reports and other data as required by Accounting, Material Planners, Supply Chain, etc.
• Ability to drive to offsite locations for weekly cycle counts

Skills Required:

• Proficiency in Microsoft Office, Frontier, and IBM Show Case Query
• Physical inventory and cycle counting experience
• Knowledge of PGT products and processes preferred
• Must be able to count, multiply and divide
• Ability to formulate solutions and resolve issues in a timely matter
• Excellent interpersonal skills in building cross-functional partnership
• Ability to lift, bend, twist, walk, and reach frequently
• Must have the ability to lift and/or move up to 50 lbs. unassisted frequently
• Ability to stand and walk on concrete floor for eight hours or more
• Ability to wear company-issued safety shirt, hard hat, steel-toed boots, safety glasses, and hearing protection
• Ability to work in varied temperatures consistent with same climate conditions of the region (Heat, humidity, etc.)

APPLY NOW!

Leading uniform and soft goods manufacturer for the U.S. military and commercial organizations in North Miami seeking for Sewing Machine Operators!

Pay Rate $9.00 p/h + Bonus / Full Time  40 HRS + OT 

Shift: Mon- Fri 7:00 am to 3:30 pm / Temp to perm job opportunity!

Duties:

• Responsible for constructing garments to client’s specifications in a fast - paced production environment.
• Operate light and heavy duty programmable sewing machine with single or multiple needles.

Requirements:

• Minimum 1 years’ experience sewing garments on industrial sewing machines
• Ability to read patterns and instruction sheets
• Ability to alter garments for different specifications
• Good hand-eye coordination.
• Detail-oriented.
• Languages: English, Spanish OR Creole
• MUST passed a sewing test first 

APPLY NOW!

 Westaff is seeking to placed a skilled Logistics Coordinator for a beverage distributor located in Miramar for immediate hire!!

Shift: 8am -5pm Monday to Friday

Pay $28.00 per hour

Logistics Coordinator:

• Have a least 2 years plus work related experience
• Coordinating transportation providers to ensure prompt and proper movement of shipments
• Responding to customer inquiries and referring clients to the proper channels
• Reviewing purchase orders and shipping documents to ensure accuracy
• Making special shipping arrangements as necessary
• Tracking and fixing shipping errors Preparing bills and invoices
• Managing distribution and shipment budgets
• Ensuring that the quality of all services provided meets the required standards
• Developing processes that make the supply chain more efficient and organized
• Bilingual (English/Spanish) preferred

Benefits:

• Weekly Payroll
• Free online skill building courses 

Apply now for our Logistics Coordinator position !!

Members of the Military and Veterans are encouraged to apply!!

Westaff is Hiring Cherry Picker Operators in the Hialeah area. 

Shift: 11:00PM-7:00AM
Pay is 14.75/HR
Monday-Friday (Flexible to work Saturdays if needed and OT)
Spanish Required

Duties:
Performs order picks to support Production and Outside Contractors
Audits order picks for accuracy
Performs restocks to primary and secondary locations
Puts product away from inbound containers
Operates forklift equipment in a safe and professional manner
Ensures proper rotation of inventory (FIFO) First in first out.
Performs cycle counts
Performs RTS (Return to stock) functions
Navigates through RF devise
Ensures proper scanning of pallet ID’s
Loads and unload trucks
Changes forklift battery
Assists in general housekeeping duties
Operates a RF scanner
Performs other duties as assigned.

Skills:
Handles multiple task and priorities.
Attention to detail.
Works well independently or with others.

Qualifications:
High School Equivalent
Cherry Picker or Forklift certification
Experience operating Cherry Picker

Physical Requirements:
Lifts up to 45lbs.

Large Manufacturer of Bullet Proof Defense products is hiring Sewing Machine Operator in Pompano Beach FL.

Pay: $8.65 per hour

Schedule: Wednesday-Saturday 6AM-6:30PM

Responsibilities:

• Sewing various materials together to create Bullet Proof defense products.
• Responsible for handling, positioning, and moving fabric through sewing machine.
• Use measuring tools such as measuring tape and rulers to measure garments.
• Complete repairs and reworks on all damaged or incomplete garments during the inspection process.
• Troubleshoot sewing machine to correct any defects in stitching or machine malfunction.
• Maintain an overall safe and clean work area.

Required Qualifications:

• Experience using a sewing machine.
• Production experience, following work orders, and/or written instruction.
• Comfortable working in an environment with strong odors such as glue or cleaners/disinfectants.
• Capable of measuring and using measuring tools such as tape measure and/or ruler Attention to detail.
• Must be able to work with little or no supervision.

Manufacturer of Safety Vests is looking for a QC Inspector for their facility in Pompano Beach FL.

Shift: Monday to Friday 6:00am to 6:00pm

Pay: $9.00 per hour

Minimum Requirements:

• Able to understand basic work and safety instructions in English.

• Physical effort standing for a prolonged period, and lifting up to 30 pounds (walking, lifting, caring, pushing) and 50 pounds – for Cutting).

• Detail oriented.

• Requires repetitive movements with fingers, hands and arms.

• Requires walking and moving in narrow spaces for long periods of time.

• Requires good vision.

• Very flexible schedule.

Manufacturer of Safety Vests is looking for a Data Entry/Warehouse Clerk for their facility in Pompano Beach FL.

Shift: Sunday to Wednesday - 6:00am to 6:00pm

Pay: $9.00

Responsibilities:

• Responsible for heavy data entry of warehouse records. (order numbers, cycle counts, inventory updates, etc.)
• Maintain the company’s electronic database of all filed documentation to ensure fast retrieval of documents.
• Prepare, compile and sort documents for data entry.
• Review data entry for accuracy.
• Updates Excel spreadsheets for hourly reporting.
• Store completed documents in designated locations (e-filing).

Duties:

• Computer skills.
• Able to speak, write and understand English.
• Good Computer skills, knowledge of Excel.

One of the leading shading fabricators in the United States is seeking skilled workers to wrap materials for their Assembly Department.

Shift: Monday to Thursday - 2:30pm to 1:00am

Pay: $12.50 per hour

Job Description:

• Employee must be able to pay close attention to detail and stay focused on task at hand.
• Receives orders from Q.C. and locates all shades called for on order.
• Pulls all necessary brackets for installation of the shade.
• Then wraps shade in paper, seals in poly plastic along with the brackets and any other components.

Skills Required:

• Detail oriented.
• Quality Focus.
• Manufacturing experience.
• Spanish only okay.

Manufacturer of Safety Vests is looking for a production worker to operate machines for their facility in Pompano Beach FL.

Shift: Wednesday to Saturday / 6:00am to 6:30pm

Pay: $9.00 per hour

Minimum Requirements:

• Responsible for loading the appropriate components and parts into the feeding hopper.
• Maintains machine and ensures the machine is lined up with the pre-punched hole and the laser beam.
• Conducts snap operating machine by pressing the pedal to punch the snap through the material
• Responsible for working according to company’s safety and quality standards.
• Maintains a safe and clean work area.
• Identify correct materials for cutting.
• Operate machine for cutting.
• Receive and process requests.
• Keep area clean and organized.
• Includes but, not limited to sweeping material shavings.

Requirements:

• Computer skills.
• Able to understand basic work and safety instructions in English.
• Experience with hand and power tools.
• Standing for long periods and lifting up to 50 pounds.

Large Manufacturer of Bullet Proof Defense products is hiring Sewing Machine Operator in Pompano Beach FL.

Pay: $8.65/Hour

Schedules open: Wednesday to Saturday - 6AM-6:30PM 

Responsibilities:

• Sewing various materials together to create Bullet Proof defense products.

• Responsible for handling, positioning, and moving fabric through sewing machine.

• Use measuring tools such as measuring tape and rulers to measure garments.

• Complete repairs and reworks on all damaged or incomplete garments during the inspection process.

• Troubleshoot sewing machine to correct any defects in stitching or machine malfunction.

• Maintain an overall safe and clean work area.

Required Qualifications:

• Experience using a sewing machine.

• Production experience, following work orders, and/or written instruction.

• Comfortable working in an environment with strong odors such as glue or cleaners/disinfectants.

• Capable of measuring and using measuring tools such as tape measure and/or ruler.

• Attention to detail.

• Must be able to work with little or no supervision.

Westaff is hiring a Bilingual (Englisg/Spanish) Human Resources Coordinator for an Apparel company in Doral.

Schedule: 8:30AM-5:00PM / Monday to Friday

Pay: $17-$20 p/hour 

Job Description:

• Respond to internal and external HR related inquiries or requests and provide assistance.

• Maintain records of personnel-related data in both paper and the database and ensure all employment requirements are met.

• Conducting new hire orientation including setting up the conference room, preparing and maintaining new hire reference materials, company tour, nameplate request, uploading intranet photo and issuing vehicle registration form.

• Manages the 90 Day Performance Evaluations including distribution, review, and tracking.

• Coordinate logistics for engagement events.

• Manage HR office such as order office supplies, schedule team events, expense reports and process invoices for payment.

• Maintain and update job descriptions company-wide.

• Maintenance of PEI organizational charts (updating regularly).

• Manage, create and maintain electronic employee personnel files, i.e. new hire, termination, filing, etc.

• Process PAF’s for transfers, promotions, location, and coding and terminations.

• Maintained reports for all actions in Oracle, such as: New Hires, Relocation, Termination, Tenure, 90-day Report, Job Change, and Promotion reports.

• Schedule interviews, process new hire information in Fusion and Taleo.

• Assist in recruiting, prescreening, onboarding, creating and maintenance of training calendar.

Skills Required:

• Basic knowledge of human resources policies and practices including benefits and I-9 processing and Federal/State laws.

• Ability to prioritize and plan work activities, using time efficiently and developing realistic action plans.

• Ability to provide timely responses to customers in a courteous manner.

• One or more years of HR-related experience.

• Strong written and oral communication skills.

• Bilingual (English/Spanish).

Manufacturer of Safety Vests is looking for a Production worker for their facility in Pompano Beach FL.

Shift: Monday to Saturday 6:00am to 7:30pm 

Pay: $9.00 per hour

Responsibilities:

• Creating labels for armor.
• Counting fabric.
• Cutting, using adhesives to glue materials.
• Communicate tactfully and effectively with other departments.

Preferred Skills:

• Basic computer skills in EXCEL,
• Able to understand English.
• Able to identify texture and colors.
• Requires bending, stooping, pushing, pulling, and lifting up to 40 pounds.
• Repetitive movements with fingers, hands & arms.

Manufacturer of Bullet Proof Armor is looking for a night shift Material Handler for their facility in Pompano Beach FL.

Pay: $8.65 per hour

Shift: 6:00am to 6:30pm - Sunday to Tuesday

Responsibilities:

• Receive incoming materials.
• Label all materials with the appropriate Product Identification Label.
• Fill out all material and production order pick lists.
• Store material in the warehouse.
• Bring materials to production floor.

Qualifications:

• Ability to work in a fast pace.
• Manufacturing industry experience.
• Warehouse experience.
• Able to lift 50 lbs.
• Requires understanding of basic English.

Manufacturer of Bullet Proof Armor is looking for a night shift Material Handler for their facility in Pompano Beach FL.

Pay: $8.65

Shift: Wednesday to Saturday 6:00am to 6:30pm

Responsibilities:

• Receive incoming materials.
• Label all materials with the appropriate Product Identification Label.
• Fill out all material and production order pick lists.
• Store material in the warehouse.
• Bring materials to production floor.

Qualifications:

• Ability to work in a fast pace.
• Manufacturing industry experience.
• Warehouse experience.
• Able to lift 50 lbs.
• Requires understanding of basic English.

Leading manufacturer in the air conditioning industry seeking for Manufacturing Engineers! 

Pay: $50K

Schedule: 8:00 AM to 4:30 pm - Monday to Friday

General Summary:

• Manufacturing Engineer evaluates manufacturing processes by designing and conducting research programs; applying knowledge of product design, fabrication, assembly, tooling, and materials; conferring with equipment vendors; soliciting observations from operators.

Principal Responsibilities:

• Complete end to end planning, direction and co-ordination of all the manufacturing processes.

• Evaluate and suggest recommendations on the manufacturing quality control processes, types of manufacturing methods to be adopted, list of processes to be followed, tooling and suggest jigs and fixtures.

• Spend time on research about the tools, methodologies and processes and find out solutions to improve production efficiency and report the findings to the organization.

• To calculate the workspace requirements and should design strategies to utilize the workspace effectively.

• Calculate the production cost, time involved, existing production resources, human resources and do a proper estimation and recommendation to management. In addition, to estimate upcoming manufacturing requirements and help the management to take right decisions.

• Estimate the number of production personnel for a project, calculate the time involved and related costs for doing the project, clearly provide direction, training to the production personnel about the work flow, create a layout about the equipment in order to get higher level of production efficiency.

• Research and create new methods of manufacturing processes and recommend to management to achieve maximum production capacity and efficiency.

• Analyze the manufacturing methods, production processes and also the production schedule involved in delivering the project. Get all these details and submit to the management with statistical data which in turn help management to clearly.

Leading manufacturer in the air conditioning industry seeking for Manufacturing Engineers!

Permanent Placement $50K M-F 8:00 AM to 4:30 pm

Principal Responsibilities:

• Complete end to end planning, direction and co-ordination of all the manufacturing processes.
• Evaluate and suggest recommendations on the manufacturing quality control processes, types of manufacturing methods to be adopted, list of processes to be followed, tooling and suggest jigs and fixturing.
• Spend time on research about the tools, methodologies and processes and find out solutions to improve production efficiency and report the findings to the organization.
• To calculate the workspace requirements and should design strategies to utilize the workspace effectively.

Requirements:

• Bachelor Degree/Diploma in Engineering preferably Industrial or Mechanical Engineering. 
• Individual with more than 5 years of working experience in the related field in the HVAC products will be considered.
• Manufacturing engineer must have knowledge of engineering and production processes
• Capable to improve the production efficiency by knowledge sharing and provide training to other workers who are in the production department of the organization
• Possess best practices knowledge in 5S+1, value stream analysis (VSA) and value stream mapping (VSM), Kaizen, PDCA, Poka-Yoke, single minute exchange of dies (SMED), PFMEA and so on. 
• Good in Microsoft Excel, ERP system, CAD/CAM and related software

APPLY NOW!

Large Manufacturer of Bullet Proof Defense products is hiring Sewing Machine Operator in Pompano Beach FL.

Pay: $8.65 Per Hour

Schedule: Wednesday-Saturday 6AM-6:30PM  

Responsibilities:

• Sewing various materials together to create Bullet Proof defense products.

• Responsible for handling, positioning, and moving fabric through sewing machine.

• Use measuring tools such as measuring tape and rulers to measure garments.

• Complete repairs and reworks on all damaged or incomplete garments during the inspection process.

• Troubleshoot sewing machine to correct any defects in stitching or machine malfunction.

• Maintain an overall safe and clean work area.

Required Qualifications:

• Experience using a sewing machine.

• Production experience, following work orders, and/or written instruction.

• Comfortable working in an environment with strong odors such as glue or cleaners/disinfectants.

• Capable of measuring and using measuring tools such as tape measure and/or ruler.

• Attention to detail.

• Must be able to work with little or no supervision.

Large Manufacturer of Bullet Proof Defense products is hiring Sewing Machine Operator in Pompano Beach FL.

Pay: $8.65- per hour,

Schedule: 6AM-6:30PM - Sunday to Wednesday

Responsibilities:

• Sewing various materials together to create Bullet Proof defense products.

• Responsible for handling, positioning, and moving fabric through sewing machine.

• Use measuring tools such as measuring tape and rulers to measure garments.

• Complete repairs and reworks on all damaged or incomplete garments during the inspection process.

• Troubleshoot sewing machine to correct any defects in stitching or machine malfunction.

• Maintain an overall safe and clean work area.

Required Qualifications:

• Experience using a sewing machine.

• Production experience, following work orders, and/or written instruction.

• Comfortable working in an environment with strong odors such as glue or cleaners/disinfectants.

• Capable of measuring and using measuring tools such as tape measure and/or ruler.

• Attention to detail.

• Must be able to work with little or no supervision.

Manufacturer of Bullet Proof Armor is looking for a Material Handler for their facility in Pompano Beach FL.

Pay: $8.65 per hour

Shift: Sunday to Wednesday 6:00am to 6:00pm

Responsibilities:

• Receive incoming materials.
• Label all materials with the appropriate Product Identification Label.
• Fill out all material and production order pick lists.
• Store material in the warehouse.
• Bring materials to production floor.

Qualifications:

• Ability to work in a fast pace.
• Manufacturing industry experience.
• Warehouse experience.
• Able to lift 50 lbs.
• Requires understanding of basic English.