This job is no longer available, but here are some other jobs:
Base Pay: 10.00 per HOUR
Supervisor Summary: Assists in the set-up and the operation of the Calender Machine, with concentration on the wind-up end of the machine by perfor...
Supervisor Summary: Assists in the set-up and the operation of the Calender Machine, with concentration on the wind-up end of the machine by performing the following duties.
Essential Duties and Responsibilities: include those found in the Calender Utility Person description and the following. Other duties may be assigned.
• Watches the wind-up end of the machine to assure that the master rolls are of good quality, wrapped tight with proper tension and that the roll edges are level.
• Helps the assistant operator or operator with cutting and changing rolls when the required lengths are achieved on previous rolls.
• Properly removes finished roll with forklift, weighs it, records and tags it and stores it in the proper place.
• When cutting sheets, the wind-up person watches the sheet cutter to assure proper size, quality, and properly aligned stock of sheets. Moves the finished stacks to the proper storage area after weighing, tagging, and recording it.
• May work in the capacity of an Assistant Operator in his/her absence.
• Is skilled with the operation and safety of battery-operated lifts.
• Works in a team environment to assist all calender team members. • May be temporarily assigned to help in other departments.
• May be assigned to run errands, utilizing company vehicles.
• Performs cleaning tasks throughout the department and may be sent for equipment parts as needed.
• Must be able to perform as a Mixer B with little or no assistance.
• Understands and completes all necessary documentation in accordance with departmental procedures.
• Follows good safety and housekeeping practices in their assigned work area. Supervisory Responsibilities: N/A Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of thApply Now More Info
Base Pay: 11.00 per HOUR
Operates and maintains forklift in a safe and efficient manner using work instructions, visual management and computer interface. Supplies producti...
Operates and maintains forklift in a safe and efficient manner using work instructions, visual management and computer interface.
Supplies production operations with raw materials to produce finished product.
Prints and scans Bill of Lading for all finished goods using computer interface and RF scanner.
Inspects finished goods for quality defects.
Transfers finished goods to staging or storage areas.
Loads finished goods onto trucks in a timely manner to meet customers delivery requirements.
Unloads incoming materials from trucks and stores in proper locations.
Accurately completes all written logs and data input to include closing sequences on tickets and printing Bill of Lading.
Ensures accurate inventory counts and notifies lead/supervisor of discrepancies.
Effectively communicates with all internal departments.
Removes/Reworks any damaged product on pallets. Maintains a clean work area and performs general housekeeping duties.
Must has experience in excelApply Now More Info
Base Pay: 10.00 per HOUR
Assists in the Set-up and operation of a Slitting Machine to produce a quality product in accordance with predetermined specifications and in accor...
Assists in the Set-up and operation of a Slitting Machine to produce a quality product in accordance with predetermined specifications and in accordance with predetermined production schedules by performing the following duties.
Responsible for assisting the Slitter Operator in set-up, loading, adjusting, operation and unloading the slitter in a manner which will produce a quality on-time product with the utmost efficiency.
Assists in maintaining accuracy and traceability throughout customer order.
Assists in maintaining customer specifications throughout customer order.
Maintains accuracy of product weighing.
Palletizes material to customer specifications.
Cuts up and properly identifies rework.Apply Now More Info
Base Pay: 11.00 per HOUR
Performs regular inspections of products Regular auditing of floor quality controls inspection of new products and handling internal and customer n...
Performs regular inspections of products
Regular auditing of floor quality controls
inspection of new products and handling internal and customer non-conformance.
Facilitate continuous improvement by participating in or leading improvement project teams, as well as providing feedback and improvement ideas relative to quality and manufacturing processes.
Base Pay: 12.00 per HOUR
ESSENTIAL FUNCTIONS of the job follow. Management may assign other duties and responsibilities as necessary. ? Sprays mold with lube as required ?...
ESSENTIAL FUNCTIONS of the job follow. Management may assign other duties and responsibilities as necessary. ? Sprays mold with lube as required ? Operates compression presses ? Assembles and weighs preps according to molding specification ? Loads prep into mold per molding specification ? Closes mold and begins cure cycle ? Unloads cured parts ? Visually inspects parts for defects according to inspection standard ? Trims, inspects and packs as required in finishing specifications ? Records required information on reports MACHINERY, EQUIPMENT & TOOLS USED: ? Compression presses ? Molds ? Hoist ? Spray guns ? Air hose ? Various hand tools (scissors, awls, wrenches, brass hand tools, knives) MATERIALS, PROCESS PARTS & FINISHED PRODUCTS USED: ? Rubber compounds ? Fabric ? Lube ? Inserts ? Cured parts ? Tape ? Cardboard cartons ? Bags EDUCATION REQUIREMENTS: High School Diploma/GED preferred EXPERIENCE: None SPECIAL SKILLS AND ABILITIES: ? Ability to read and comprehend SOIs, safety regulations and inspection standards ? Ability to run multiple presses with different processes PHYSICAL REQUIREMENTS: While performing the essential functions of this job, the employee is required to ? Continuously walk, stand, hear (more than 6 hours/8 hour workday) ? Frequently talk; use hands and fingers to handle; reach with hands and arms (up to 6 hours/8 hour workday) ? Occasionally lift up to 50 lbs. (less than 2 hours/8 hour workday) ? Possess close vision, color vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus WORK ENVIRONMENT: ? Safety shoes, safety glasses and hearing protection are required. ? Heat resistant gloves required on certain jobs ? The ambient temperature in the work environment during the summer months can exceed 100 degrees. ? Exposed to extreme surface temperature on moldsApply Now More Info
Base Pay: 9.00 per HOUR
The position of the Production worker has various duties throughout the manufacturing facility. The production worker should perform to the best of...
The position of the Production worker has various duties throughout the manufacturing facility. The production worker should perform to the best of their abilities in accordance with Company Policies to secure the financial situation of the Company. Duties: Carrying the tasks assigned to the position properly and consistently with the interest of the Company. Knowledge and compliance with all rules, regulations, instructions, orders and findings within the scope of work on the position. Compliance with working hours in the plant and using them in the most efficient way. Perform production task according to Supervisor’s instructions respecting existing technical conditions and required schedule and rhythm of production. Reasonable level of knowledge on health and safety and fire protection rules, among others and in particular: maintaining proper conditions of fire protection in work area; identifying and immediate removal of potential fire hazard root causes and prompt reporting this fact to supervisor. Keeping assigned tools and equipment in good condition. Keeping workplace clean and tidy. Keeping workplace and line in such condition which allows immediate production running after shift changeover. Securing company property against theft, damage, fire. Reporting to Supervisor accidents occurring during work. Continuous improvement of knowledge and skills. Keeping records of technological parameters and their control on Company’s forms. Controlling and ensuring product quality in accordance with the requirements. Reporting to Supervisor about breakdown or machinery defects and checking their conditions after repairs performed by Employees of Maintenance Dept. Keeping professional matters confidential. Compliance with all the provisions of Employee Handbook, Company Policies, procedures and regulations. Performing any other tasks assigned by the Supervisor in accordance with Employee Handbook and Company Policies.Apply Now More Info