This job is no longer available, but here are some other jobs:

Assistant slitter

Wytheville VA

Base Pay: 10.00 per HOUR

Assistant Slitter OperatorSummary:Assists in the Set-up and operation of a Slitting Machine to produce a quality product in accordance with predete...


Assistant Slitter Operator
Summary:
Assists in the Set-up and operation of a Slitting Machine to produce a quality product in accordance with predetermined specifications and in accordance with predetermined production schedules by performing the following duties.
Essential Duties and Responsibilities: include the following. Other duties may be assigned.
? Responsible for assisting the Slitter Operator in set-up, loading, adjusting, operation and unloading the slitter in a manner which will produce a quality on-time product with the utmost efficiency.
? Assists in maintaining accuracy and traceability throughout customer order.
? Assists in maintaining customer specifications throughout customer order.
? Maintains accuracy of product weighing.
? Palletizes material to customer specifications.
? Cuts up and properly identifies rework.
? Maintains proper safety and housekeeping practices at all times.
? May act as operator in his/her absence.
Supervisory Responsibilities:
N/A
Qualifications:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education and/or Experience:
High school diploma or general education degree (GED); or one to two years related experience and/or training; or equivalent combination of education and experience.
Language Skills:
Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization.
Mathematical Skills:
Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.
Reasoning Ability:
Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.
Computer Skills:
To perform this job successfully, an individual should have knowledge of Spreadsheet software and Word Processing software.
Physical Demands:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is regularly required to stand and walk. The employee is frequently required to use hands to finger, handle, or feel; reach with hands and arms; stoop, kneel, crouch, or crawl and talk or hear. The employee is occasionally required to sit and climb or balance. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.
Work Environment:
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts; high, precarious places; fumes or airborne particles;

Apply Now More Info

General Labor-Assembly

Wytheville VA

Base Pay: 11.00 per HOUR

  Perform multiple manufacturing related duties for the completion of product assembly. Duties may include but are not limited to: prepari...

 

Perform multiple manufacturing related duties for the completion of product assembly. Duties may include but are not limited to: preparing materials for product assembly, preparing materials for the construction of transformer platforms and cabinetry and maintaining a safe and clean work environment

 

Determine the tools and equipment needed to do a job

Lift raw materials, finished products, and packed items, manually or using hoists

Operate machinery used in the production process

Assist others as necessary

Clean and lubricate equipment

Observe equipment operations so that malfunctions can be detected

Notify supervisor of any equipment malfunctions

Examine products to verify conformance to quality standards

Notify supervisor of any nonconformance to product design/quality standards

Lifting up to 40 lbs.

.

Customer Focus – Act with a customer/supplier outlook.  Demand the best quality of your internal suppliers and provide only the best quality to your customers whether internal or external.

Teamwork –Work effectively in a team environment, gaining consensus whenever possible.

Time Management - Manage one's own time to meet deadlines and objectives.

Critical Thinking –Able to use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.

Detail Oriented – Able to recognize and not overlook the important details in work assignments.

Engineering Drawings – Able to understand and correctly interpret complex drawings and instructions

Precision - Ability to perform precise material preparation and assembly tasks through manual/finger dexterity and arm/hand steadiness

Lifting – Must be able to lift up to 40 lbs

Standing – Long periods of time

 

          Must be able to work in a physically challenging environment

Apply Now More Info

Injection Mold Machine Operator

Wytheville VA

Base Pay: 13.00 per HOUR

SUMMARY Operates and maintains multiple injection molding machines to produce and audit PET plastic preforms. ESSENTIAL DUTIES AND RESPONSIBILITIES...

SUMMARY Operates and maintains multiple injection molding machines to produce and audit PET plastic preforms. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Operates multiple injection molding machines using written work instructions, visual management, and computer interface. Conducts quality inspections using specific written and visual guidelines. Monitors operations of injection molding machine to detect machine malfunctions. Stops machines and production to report malfunctions to the process lead and/or supervisor. Performs minor adjustments to the machines to correct improper functions. Performs preventive maintenance on machines. Scans and consumes production tickets using computer interface. Accurately completes all logs, data input and written, to include hourly checks and downtime. Removes any damaged material from machine. Assembles gaylord boxes to be used for storage and transport of finished product. Operates pallet jack and forklift to move finished product from machine to the staging area. Effectively communicates with all internal departments. Grinds defective PET preforms. Maintains a clean work area and performs general housekeeping duties.

Apply Now More Info

Blow Mold Machine Operator

Wytheville VA

Base Pay: 13.00 per HOUR

SUMMARY Operates and maintains multiple blow molding machines, vision systems, and laser dating systems in a safe manner to produce and audit PET c...

SUMMARY Operates and maintains multiple blow molding machines, vision systems, and laser dating systems in a safe manner to produce and audit PET containers. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Operates multiple blow molding machines, laser dating systems, and vision systems using written work instructions, visual management, and computer interface. Conducts quality inspections using specific written and visual guidelines. Ensures operations are completed in accordance with Amcor Rigid Plastics’s safety procedures. Monitors operations of blow molding machine to detect machine malfunctions. Stops machines and production to report malfunctions to the process lead and/or supervisor. Performs minor adjustments to the machines to correct improper functions. Performs preventive maintenance on machines. Scans and consumes production tickets using computer interface. Accurately completes all logs, data input and written, to include hourly checks and downtime. Effectively communicates with all internal departments. Removes any damaged material from machine. Grinds defective PET containers. Maintains a clean work area and performs general housekeeping duties. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION High School diploma or general education (GED); or one to three months related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of cust

Apply Now More Info

Main production line operator

Dublin VA

Base Pay: 14.00 per HOUR

Job Description: Main Production Line Operator. Duties: ? Carrying the tasks assigned to the position properly and consistently with the interest o...

Job Description: Main Production Line Operator. Duties: ? Carrying the tasks assigned to the position properly and consistently with the interest of the Company. ? Knowledge and compliance with all rules, regulations, instructions, orders and findings within the scope of work on the position. ? Reasonable level of knowledge on health and safety and fire protection rules, among others and in particular: - maintaining proper conditions of fire protection in work area; - identifying and immediate removal of potential fire hazard root causes and prompt reporting this fact to supervisor. ? Keeping assigned tools and equipment in good condition. ? Keeping workplace clean and tidy. ? Keeping workplace and line in such condition which allows immediate production running after shift changeover. ? Securing company property against theft, damage, fire. ? Reporting to Supervisor accidents occurring during work. ? Continuous improvement of knowledge and skills. ? Keeping records of technological parameters used during production and their control checks on Company forms. ? Controlling and ensuring product quality in accordance with the requirements. ? Reporting to Supervisor any breakdown or machinery defects and checking the machinery condition after the repair performed by Maintenance Dept. ? Securing continuous supply of raw materials needed for production (paraffin and oil, dyes, fragrances, additives) and keeping records raw materials / components intake in Company forms. ? Keeping professional matters confidential. ? Comply with all the provisions of Employee Handbook, Company Policies, procedures and regulations. ? Performing any other tasks assigned by the Supervisor in accordance with Employee Handbook and Company Policies.

Apply Now More Info

Packaging

Dublin VA

Base Pay: 9.00 per HOUR

Carrying the tasks assigned to the position properly and consistently with the interest of the Company. Knowledge and compliance with all rules, re...

Carrying the tasks assigned to the position properly and consistently with the interest of the Company. Knowledge and compliance with all rules, regulations, instructions, orders and findings within the scope of work on the position. Compliance with working hours in the plant and using them in the most efficient way. Perform production task according to Supervisor’s instructions respecting existing technical conditions and required schedule and rhythm of production. Reasonable level of knowledge on health and safety and fire protection rules, among others and in particular: maintaining proper conditions of fire protection in work area; identifying and immediate removal of potential fire hazard root causes and prompt reporting this fact to supervisor. Keeping assigned tools and equipment in good condition. Keeping workplace clean and tidy. Keeping workplace and line in such condition which allows immediate production running after shift changeover. Securing company property against theft, damage, fire. Reporting to Supervisor accidents occurring during work. Continuous improvement of knowledge and skills. Keeping records of technological parameters and their control on Company’s forms. Controlling and ensuring product quality in accordance with the requirements. Reporting to Supervisor about breakdown or machinery defects and checking their conditions after repairs performed by Employees of Maintenance Dept. Keeping professional matters confidential. Compliance with all the provisions of Employee Handbook, Company Policies, procedures and regulations. Performing any other tasks assigned by the Supervisor in accordance with Employee Handbook and Company Policies.

Apply Now More Info

General Labor

Wytheville VA

Base Pay: 11.00 per HOUR

Perform multiple manufacturing related duties for the completion of product assembly. Duties may include but are not limited to: preparing material...

Perform multiple manufacturing related duties for the completion of product assembly. Duties may include but are not limited to: preparing materials for product assembly, preparing materials for the construction of transformer platforms and cabinetry and maintaining a safe and clean work environment Determine the tools and equipment needed to do a job Lift raw materials, finished products, and packed items, manually or using hoists Operate machinery used in the production process Assist others as necessary Clean and lubricate equipment Observe equipment operations so that malfunctions can be detected Notify supervisor of any equipment malfunctions Examine products to verify conformance to quality standards Notify supervisor of any nonconformance to product design/quality standards Lifting up to 40 lbs. . Customer Focus – Act with a customer/supplier outlook. Demand the best quality of your internal suppliers and provide only the best quality to your customers whether internal or external. Teamwork –Work effectively in a team environment, gaining consensus whenever possible. Time Management - Manage one's own time to meet deadlines and objectives. Critical Thinking –Able to use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems. Detail Oriented – Able to recognize and not overlook the important details in work assignments. Engineering Drawings – Able to understand and correctly interpret complex drawings and instructions Precision - Ability to perform precise material preparation and assembly tasks through manual/finger dexterity and arm/hand steadiness Lifting – Must be able to lift up to 40 lbs Standing – Long periods of time Must be able to work in a physically challenging environment

Apply Now More Info

Welder

Independence VA

Base Pay: 13.00 per HOUR

I. General Position Summary The Welder is responsible for welding metal components utilizing proper welding equipment to manufacture parts and asse...

I. General Position Summary The Welder is responsible for welding metal components utilizing proper welding equipment to manufacture parts and assemblies as required, meeting defined production schedules. a. Essential Functions / Major Responsibilities ? Build welded assemblies for products and changes to existing products per engineering documents and established production standards. ? Set-up, and lay out work using fixtures and guides to repair, modify, or fabricate parts and assemblies. ? Arrange parts for welding and staging processes. ? Review finished assemblies and parts to ensure accuracy against drawings and BOMs. ? Report fabrication issues and assist in resolutions as required. ? Operate and/or use related equipment and tools necessary to complete parts to specifications, which include forklifts, hoists, slings, grinders (portable & bench), cutting torches, hand tools, drills, punches, tape measure, etc. ? Diagnose process and quality issues, and make improvement recommendations to department manager. ? Reject defective parts and material according to policy. ? Ensure safe, careful use, treatment, and maintenance of tools and equipment. ? Participate in and attend cross functional meetings as required. ? Performs other duties as assigned by management. b. Specific Job Requirements ? Applies acquired job skills and company policies and procedures to complete assigned tasks. ? Works on assignments that are semi routine in nature but recognizes the need for occasional deviation from accepted practice. ? Follows established procedures on routine work; requires instructions only on new assignments. ? Ability to read, interprets, and follows job order specifications, blueprints, work instructions, and procedures as well as safety rules and other general instructions in both oral of written form. ? Responsible for his/her own quality of workmanship. ? Maintain a clean and safe work environment. ? Comply with all company and industry process safety

Apply Now More Info

Production Control Specialist

WYTHEVILLE VA

Base Pay: 12.50 or more depending on experience

 SUMMARY – manages the flow of incoming raw materials from suppliers and outgoing finished goods to customers through steady communicati...

 SUMMARY – manages the flow of incoming raw materials from suppliers and outgoing finished goods to customers through steady communication with suppliers, customers and representatives throughout production process. ESSENTIAL DUTIES AND RESPONSIBILITIES • Maintains an ergonomically and otherwise physically safe, well-organized and clean work environment in keeping with 5S standards • Practices safe work habits; follows safety procedures; wears required personal protective equipment and reports any unsafe incidents and conditions to supervisor 1. Communicates with customers to provide lead times for finished product availability; receives incoming orders from customers, creates sales orders by entering corresponding order information (quantity, specifications, due date, etc.) into Sage computer software; invoices customers for finished goods 2. Orders raw materials to fulfill customer requirements; creates purchase order and sends to supplier; documents receipt of raw materials into Sage computer program and production worksheets 3. Creates and maintains production schedule based on NSK, Denso and Aisin customer demand 4. Schedules freight carriers to ship incoming raw materials from suppliers and outgoing finished products to customers to ensure on-time delivery 5. Monitors daily customer shipments to ensure production schedule is met 6. Maintains communication with customers regarding order status and develops recovery plan, as needed, to accommodate customer 7. Enters actual daily production required to fulfill customer demand 8. Maintains communication with Production Management and Team Leaders regarding shipment requirements and order fulfillment 9. Evaluates spreadsheets of raw material usage and customer demand to determine historic trends 10. Enters monthly shipping requirements on production display board and provides daily updates in accordance with customer requirements 11. Conducts on-going internal inventory audit and reconciliation betwe

Apply Now More Info